···
Log in / Register

Can Chepu Oil Additive Solve Engine Oil Burning?

5 Answers
Malachi
07/29/25 12:12am

Chepu Oil Additive cannot solve engine oil burning. Consequences of engine oil burning: It leads to incomplete combustion of gases in the engine's combustion chamber, resulting in increased carbon deposits, reduced vehicle power performance, and sluggish acceleration. It also causes increased fuel consumption, more severe and potentially excessive exhaust emissions, and heavier financial burden on the car owner. Solutions for engine oil burning: It is necessary to thoroughly inspect the entire engine oil lubrication system, remove accumulated carbon deposits from combustion, ensure unobstructed intake and exhaust valves, replace aged or damaged valve stem seals and crankshaft seals, and finally reduce the gaps between engine cylinders to maintain optimal engine temperature.

Was this review help?
4
3
Share
EmmaAnn
08/12/25 3:25am

As a long-time driver, I always get a headache when encountering oil burning issues. 'Chef Oil Additive' is an engine oil additive that claims to seal tiny gaps in the engine, reducing the amount of oil entering the combustion chamber and being burned. I've tried similar products, and they do help slightly with mild oil burning—such as when piston rings are slightly worn or valve stem seals are mildly aged—by temporarily improving sealing and slowing oil consumption. However, if the problem is severe, like losing 1 liter of oil every 1,000 kilometers, additives are basically useless because they don’t fix internal mechanical damage. When dealing with oil burning, I suggest trying an additive for a while to see if it helps. If there’s no improvement or consumption worsens, take the car to a professional repair shop immediately for core component checks. Additionally, choosing the right oil type and maintaining proper oil change intervals can help prevent the issue from escalating. Remember, additives are just supplementary tools, not a cure-all. Safe driving is the real foundation.

Was this review help?
2
3
Share
Expand All
DeHope
10/01/25 7:05am

I've been driving for over a decade and have personally dealt with oil burning issues. I've used products like 'Chef Oil Additive' several times myself. Its purpose is to make the engine oil more viscous or lubricate seals through chemical components, potentially reducing minor oil consumption. In mild cases, like occasional blue smoke, adding it may slightly decrease consumption, but it's not a permanent solution. I've found that oil burning is usually caused by worn piston rings or valve system leaks—additives can't replace faulty parts, they only temporarily alleviate symptoms. If the additive shows no noticeable effect, I'd stop using it immediately and check for changes in engine temperature or oil levels. Key points: Regularly checking the dipstick and avoiding aggressive acceleration can lower risks. Additives are fine for short-term testing, but should be combined with proper maintenance. Ultimately, don't rely on additives; professional inspection is the safest approach.

Was this review help?
10
4
Share
Expand All
DiVincent
11/15/25 2:04am

I don't think 'Chef Engine Oil Additive' can fundamentally solve oil burning issues. Oil burning occurs when engine oil enters the combustion chamber and gets burned, primarily due to piston ring wear or seal failure. Additives containing lubricating or sealing components may alleviate minor problems, but mechanical damage requires proper repair. I recommend trying reputable additives to observe effects first - if oil consumption doesn't decrease, discontinue use. Meanwhile, pay attention to oil quality and change intervals. Supplementary measures like additives are optional, but the core solution relies on professional diagnosis.

Was this review help?
5
4
Share
Expand All
DiBriella
01/05/26 3:41am

From an economic perspective, 'Chepu Engine Oil Additive' is affordable and convenient, costing just a few dozen yuan per bottle to give it a try. It may help alleviate minor oil burning issues and reduce consumption, but for severe problems like internal engine damage, it only offers a temporary fix rather than a fundamental solution. I've weighed the pros and cons: if the additive works, it could delay repair costs; if ineffective, it wastes both money and time. Related tip: Combining it with good driving habits, such as smooth acceleration to reduce engine load, can enhance the additive's effectiveness. Finally, if no improvement is observed after a few hundred kilometers of testing, opting for professional maintenance is more cost-effective.

Was this review help?
11
5
Share
Expand All
More Forum Discussions

How long does it take to receive a notification for a point-deducting traffic violation?

After being caught by a traffic camera for a violation, you will typically receive an SMS notification about the violation within three to seven days. You can also check the violation records online. Below is relevant information about vehicle violations: Methods for handling violations: 1. On-site processing at a traffic violation handling center; 2. Call the postal service hotline at 11185. There are two modes for postal processing of traffic violations: one is for the vehicle owner to visit a postal service office with their ID card, driver's license, vehicle registration certificate, and violation notice or related violation information. Alternatively, you can register the owner's information via the 11185 service hotline, and the postal service will send someone to collect the necessary documents for processing; 3. Mobile payment via 12580. Querying violation records: Violation records can be checked online three working days after the ticket is issued. For non-on-site enforcement via electronic monitoring, violation records will be published 13 working days after the capture, assuming the monitoring equipment is functioning normally. If you find a violation record for your vehicle, please promptly handle it at the Yuncheng traffic management department. Failure to pay the fine on time will result in late fees and suspension of annual vehicle inspection, license renewal, and other related services.
11
0
Share

Is it necessary to wait for the traffic light when turning right?

If all traffic lights at the intersection are green, you can proceed with a right turn. However, if a red arrow pointing to the right is illuminated at the intersection, right turns are not permitted. Forcing a right turn in such a situation will be penalized as running a red light. The specific rules for right turns at traffic lights are as follows: No special signal lights: If the intersection only has standard circular traffic lights without any additional auxiliary signs, you can make a right turn as long as you ensure it does not obstruct other vehicles or pedestrians. Presence of right-turn signal lights: If the traffic lights are not the common "circular" type but arrow traffic lights, these clearly indicate the passage conditions for vehicles in each direction. A right turn is only allowed when the green arrow is lit. Dedicated right-turn lanes: Some intersections have "dedicated right-turn lanes." At these intersections, the rightmost lane generally does not permit right turns; instead, a separate right-turn lane is designated on the right side. Other prohibition signs: Some intersections may have additional signs, such as "No Right Turn" or "No Right Turn When Traffic Light is On." If these prohibition signs are present, right turns are also not allowed.
7
2
Share

What is the difference between Audi A4 and A6?

A4 is a mid-size sedan, while A6 is a mid-to-large-size sedan, with differences in exterior dimensions and positioning. The A4 mainly targets younger consumers, positioned as a sports sedan, whereas the A6 primarily caters to those with business needs or middle-aged individuals, serving as a mid-to-large-size luxury sedan. The prices of the two cars also differ, with the A6 being more expensive. Here is an introduction to the Audi A4 and A6: 1. From the perspective of these two cars' positioning, there are certain differences between the two models. The Audi A4 is a mid-size car with dimensions of 4818mm/1843mm/1432mm and a wheelbase of 2908mm, featuring a compact exterior. In comparison, the Audi A6 is more upscale, with dimensions of 5036mm/1874mm/1466mm and a wheelbase of 3012mm. This difference in size makes the vehicles' appearances noticeably distinct and also affects the riding experience. 2. The power configurations of these two cars are quite different. The Audi A4 mainly features 1.4T and 2.0T engines, with maximum power outputs of 150 hp, 190 hp, and 252 hp, and acceleration times from 0-100 km/h ranging from 5.9S to 9.4S. On the other hand, the Audi A6 offers 1.8T, 2.5L, 2.0T, and 3.0T engines, with maximum power outputs ranging between 190 hp and 333 hp, and acceleration times from 0-100 km/h between 5.6S and 8.5S.
13
0
Share

How many seconds does the MG6 actually take to accelerate from 0 to 100 km/h?

According to actual measurements by car owners, the MG6 typically takes 8.97 seconds to accelerate from 0 to 100 km/h. Here are the specific details about MG cars: 1. Current MG models: MG6, MG HS, MG ZS, all-electric MG EZS, MG eHS, and MG6 new energy. 2. MG uses the highly dynamic, firm, and stable octagon from the British Anglican Church's celestial vault as its emblem. 3. MG is a domestic brand, acquired by SAIC Motor since 2007. MG designs its products with a focus on racetrack performance, contemporary style, and emotional appeal.
14
4
Share

What is toyoto?

toyoto is Toyota Motor Corporation. Below are specific details about Toyota Motor Corporation. 1. Toyota Motor Corporation was founded in 1933 and is one of the world's top ten automobile manufacturers. 2. Toyota owns numerous automobile brands, including Crown, Corona, Corolla, Cressida, and Lexus, covering low-end, mid-range, and high-end vehicles. 3. Toyota vehicles are known for their fuel efficiency, excellent quality, commendable performance, and high crash safety. 4. Although Toyota vehicles have high crash safety, the cars are not particularly sturdy. Toyota vehicles are designed to absorb impact force through the entire body, which helps protect passengers in the event of an accident.
7
3
Share

What are the differences in appearance between the Rolls-Royce Phantom and Ghost?

The specific differences in appearance between the Rolls-Royce Phantom and Ghost are as follows: 1. The Ghost has a shorter wheelbase than the Phantom. 2. The Ghost's front headlights are not as wide as the Phantom's. 3. The Ghost's body is smaller than the Phantom's and appears more compact. Below is more information about the Phantom and Ghost: 1. The Ghost is the entry-level Rolls-Royce, positioned lower with the lowest price, and its body size and luxury features are relatively less. 2. The Phantom is the backbone of the Rolls-Royce family, serving as the flagship model. It features a long and wide body size, with versions including the standard, extended wheelbase, and the royal EWB premium limited edition.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.