Can Car Tire Bolts Loosen While Driving?

What are the requirements for opening an auto quick repair shop?

Opening an auto repair shop requires the following certificates: "Auto Repair License"; "Business License"; "Organization Code Certificate"; "Tax Registration Certificate". Below is the relevant introduction about applying for an operating license: 1. Conditions for applying for an operating license: Have production workshops and parking lots suitable for the repair vehicles corresponding to the business. Have equipment and facilities suitable for the business. Have necessary technical personnel. Have a sound maintenance management system. Have necessary environmental protection measures. 2. The process for applying for an operating license: The applicant submits a written application. The applicant submits complete and valid application materials. The operating authority accepts the application, conducts on-site verification, and signs the verification opinion. The operating authority makes a decision to approve or disapprove the application. If approved, issue the "Transport Administrative License Decision" and issue the motor vehicle maintenance operating license; if disapproved, return the materials and issue the "Transport Administrative License Disapproval Decision".

111

Share

What Causes the Noise from the Right Rear Wheel of the Car?

Noise from the right rear wheel of the car is an issue with the suspension system. Here is an introduction to suspension-related content: Check if the springs are aged: The owner can inspect whether the upper and lower pads of the springs have aged, causing the springs to collide with metal supports and produce noise. Also, check the aging level of the rubber components at the connection points of various suspension links. Additionally, inspect whether the rear shock absorbers are leaking oil. If there is oil leakage from the shock absorbers, they can no longer function effectively. Check the shock absorber screws: See if the rubber sleeves of the upper and lower fixing screws are loose. If they are, they need to be replaced or secured firmly. Inspect the screws of the chassis, rear axle, and tires for looseness, and tighten all screws that may cause noise. If the dust cover has hardened and elongated, causing noise due to friction, the excess part of the dust cover should be trimmed off.

112

Share

Can a Private Car Carry 5 People?

Check the allowable passenger capacity. For a 5-seater private car carrying 6 people, the penalty is 3 demerit points and a fine of 100 yuan. Below is relevant information about driving private vehicles: 1. Explanation: Driving non-operational vehicles exceeding the approved passenger capacity by less than 20% results in a penalty of 3 demerit points and a fine of 100 yuan; exceeding by more than 20% results in 6 demerit points and a fine of 200 yuan. 2. Hazards of Overloading: (1) Vehicle overloading severely damages road infrastructure. Since overloaded vehicles far exceed the design load of roads and bridges, it causes road surface damage, bridge fractures, and significantly shortens their service life. (2) Overloaded vehicles have increased mass and inertia, leading to longer braking distances and higher risks. Severe overloading can cause tire blowouts, sudden deviation, brake failure, rollovers, etc., due to excessive tire load and deformation. Additionally, overloading affects vehicle steering performance, increasing the risk of accidents due to loss of steering control.

105

Share

What are the differences between Wuling Rongguang V and Wuling Hongguang V?

The following is a detailed introduction to the differences between Wuling Hongguang and Wuling Rongguang: 1. Wuling Hongguang has a body size of 4425 1670 1860, a wheelbase of 2850mm, a suspension structure of front MacPherson and rear leaf spring solid axle, and a front-engine rear-wheel drive layout. The engine that meets the China VI emission standard is the PTECDTL2B-LAR 1.5L, with a maximum power of 73kw and a peak torque of 140N·m (3400-4400 rpm). It is matched with a 5-speed manual transmission, and the power performance is average, because the upgrade to the China VI high standard will lead to an increase in back pressure due to the reduction of exhaust purification system flow rate, resulting in some power loss. 2. Wuling Rongguang has a body size of 4415 1665 1850, a wheelbase of 2720mm, a suspension structure of front MacPherson and rear leaf spring solid axle, and is also a front-engine rear-wheel drive layout. The 2019 Rongguang uses the same 1.5L naturally aspirated engine as the Hongguang, and both are matched with a 5-speed manual transmission.

114

Share

How to Reset the Maintenance Light on the 2020 Great Wall Poer 7?

Here is the method to reset the maintenance light on the 2020 Great Wall Poer 7: 1. Turn off the ignition switch and shut down the vehicle; 2. Press and hold the right button on the instrument panel, which is the reset button; 3. Turn on the ignition switch while keeping the reset button pressed; 4. Wait for a few seconds until the maintenance light enters reset mode, then release the reset button; 5. Within 20 seconds of releasing the reset button, press the left button on the instrument panel, which is the 'Menu' button, to confirm the reset; 6. At this point, the maintenance light will return to its normal display mode. Here is some related information about the maintenance light: 1. The maintenance light is a reminder function that prompts car owners to perform vehicle maintenance at certain mileage intervals or time periods, displayed in the form of instrument panel messages, screen information, or indicator lights. 2. Resetting the maintenance light means performing a zero reset on the reminder information after maintenance is completed, which is essentially an information reset. Here is the method to reset the maintenance light on the 2020 Great Wall Poer 7: 1. Turn off the ignition switch and shut down the vehicle; 2. Press and hold the right button on the instrument panel, which is the reset button; 3. Turn on the ignition switch while keeping the reset button pressed; 4. Wait for a few seconds until the maintenance light enters reset mode, then release the reset button; 5. Within 20 seconds of releasing the reset button, press the left button on the instrument panel, which is the 'Menu' button, to confirm the reset; 6. At this point, the maintenance light will return to its normal display mode. Here is some related information about the maintenance light: 1. The maintenance light is a reminder function that prompts car owners to perform vehicle maintenance at certain mileage intervals or time periods, displayed in the form of instrument panel messages, screen information, or indicator lights. 2. Resetting the maintenance light means performing a zero reset on the reminder information after maintenance is completed, which is essentially an information reset.

107

Share

What is the Civic Red Badge?

The Civic with a red badge refers to the performance version of the Civic, which is a specially modified and tuned edition. Relevant details are as follows: 1. There is a significant performance difference between the standard Civic and the red badge Civic. The red badge Civic is a modified performance vehicle, with the red badge originally being a symbol exclusive to Honda's racing cars. 2. The red badge Civic is equipped with two engines: one is a 1.0-liter turbocharged engine, and the other is a 1.5-liter turbocharged engine. The 1.0-liter turbocharged engine in the red badge Civic has the model code P10A1.

118

Share