Can Car-Free Families in Beijing Apply for Gasoline Vehicle Quotas?

Can Four-Stroke Engines Use Two-Stroke Engine Oil?

Four-stroke engines cannot use two-stroke engine oil. Four-stroke gasoline engines: The working cycle of a four-stroke gasoline engine consists of four piston strokes: intake stroke, compression stroke, power stroke, and exhaust stroke. Four-stroke engines are reciprocating piston internal combustion engines, which can be classified into three types based on the fuel used: gasoline engines, diesel engines, and gas fuel engines. Piston internal combustion engines that use gasoline or diesel as fuel are called gasoline engines or diesel engines, respectively. Piston internal combustion engines that use natural gas, liquefied petroleum gas, or other gaseous fuels are called gas fuel engines. Using four-stroke engine oil in two-stroke engines can cause the following problems: First, four-stroke engine oil contains antioxidants and anti-corrosion agents such as zinc dialkyldithiophosphate (ZDDP), which can easily cause spark plug fouling and generate deposits, leading to electrode bridging and misfiring. Second, the high ash content in four-stroke engine oil can cause premature ignition in the engine and produce large amounts of combustion deposits. Third, single-grade four-stroke engine oil contains high-viscosity base oils that tend to produce smoke and deposits, while multi-grade oils contain relatively oxidation-stable polymers. Additionally, the high flash point of four-stroke engine oil (around 210°C) results in incomplete combustion, ultimately leading to severe deposits and exhaust blockage.

13

0

Share

How Should the Feet Be Positioned in a Manual Transmission Car?

The left foot is responsible for operating the clutch, while the right foot handles the accelerator and brake. Below is more related information: A manual transmission car has three pedals, arranged from left to right: the first is the clutch, the second is the brake, and the third is the accelerator. For most people, the left foot controls the clutch, while the right foot controls the brake and accelerator. Beginners often confuse the accelerator and brake. When the right foot is placed on the brake pedal, it is usually not pressed down in most situations but remains in a "ready" state. In case of an emergency, no judgment is needed—simply press down immediately. The right foot never needs to make a judgment and can always press the brake at the fastest speed and earliest moment. The right foot must be positioned appropriately—when not accelerating, it should always rest above the brake pedal. This ensures the driver never has the chance to mistake the accelerator for the brake, thus completely avoiding such errors. Introduction: A manual transmission (MT), also known as a manual gearbox, requires the driver to manually shift gears by moving the gear lever to change the gear engagement inside the transmission, altering the gear ratio to achieve speed variation. Working Principle: By using the shift fork, the transmission changes the gear ratio (tooth ratio) of the meshing gears, thereby adjusting the driving torque to suit different driving conditions. Since the torque converter in an automatic transmission has a limited range, multiple planetary gear sets are connected behind the turbine to improve efficiency. The hydraulic control system automatically adjusts the planetary gears based on engine conditions, enabling automatic gear shifting and torque variation.

17

5

Share

Why are Giti Tires so cheap?

Giti Tires are relatively inexpensive online because their overall performance is not as outstanding compared to other tire brands, and they lack significant proprietary technological components, resulting in lower production costs and thus cheaper prices. More relevant information is as follows: 1. Control Series: The Control Series incorporates Giti's racing R&D technology with ISOM finite element carcass structure design, high-strength polyester cord carcass, and ultra-hard bead apex, which not only enhances tire safety but also improves handling precision. The robust shoulder tread blocks and transverse groove design minimize tread deformation during cornering, providing stronger support for higher-speed turns. 2. Comfort Series: The Comfort Series utilizes 3P technology and multi-pitch chaotic tread arrangement to effectively reduce road noise, enhance comfort, and also features long mileage and fuel efficiency. 3. SUV Series: The SUV Series employs 'Durable Contact Patch' technology to strengthen the tread-ground contact capability, along with a new low rolling resistance and wear-resistant compound, reducing rolling resistance while increasing tread durability. Additionally, the double-layer high-strength polyester carcass and high-modulus steel belt improve carcass uniformity, mitigating road bumps for a more comfortable ride. 4. All-Season Series: The All-Season Series excels in both wet-road handling and dry-road grip. With professional tread design and special material additives, Giti's All-Season Tires deliver excellent performance in both winter and summer.

11

5

Share

What to Do If Driver's License Expires for a Few Days?

If your driver's license has expired for a few days, you need to go to the vehicle management office to renew it. The documents required for renewal include: The driver's identity proof. If applying through a proxy, the proxy's identity proof is also required. If there is no signature of the principal on the application form, a power of attorney must be submitted separately. A physical condition certificate issued by a medical institution at or above the county level or a military or armed police force medical institution at or above the regimental level. For those holding a driver's license for small automatic transmission passenger vehicles for the disabled, a physical condition certificate issued by a specialized medical institution is required. Article 71 of the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses' stipulates that the content of driver's license review includes: Traffic safety violations and accident handling records. Physical condition. Traffic safety violation points and participation in study and exams after accumulating 12 points. Drivers holding licenses for large buses, tractors, city buses, medium buses, or large trucks who have points in a scoring cycle, as well as drivers holding other types of licenses who have caused fatal accidents with equal or greater responsibility without having their license revoked, must attend no less than three hours of study on traffic safety laws and regulations, safe and civilized driving, emergency response, etc., and receive case-based traffic accident education during the review. Three recent photos of the driver. The photos must be straight-edged, front-facing, full-color, bareheaded, single-person, half-length ID photos taken within six months before the application.

5

0

Share

How Long Can You Drive with Low Engine Coolant?

When the engine is cold, you can generally drive about 1 to 3 kilometers if the radiator is empty. However, if the engine is already hot, continuing to drive will cause damage to the engine. Using distilled water as an emergency substitute: If you encounter a situation where the radiator is low on coolant while driving, never use tap water as a substitute. Tap water contains minerals that can form scale in the radiator pipes when heated. In severe cases, this scale can clog the engine's cooling system. In an emergency, you can use distilled water as a temporary substitute for antifreeze. After driving to the nearest service point, you must immediately replenish the antifreeze. When adding antifreeze, be sure to drain the distilled water from the radiator to prevent the antifreeze from deteriorating. Warning signs of low engine coolant: If the car's radiator is low on coolant, the dashboard will display a low coolant warning symbol, which typically resembles a thermometer and is relatively easy to identify. Once this warning light comes on, it is not advisable to continue driving. If the radiator is low on coolant, the heat generated by the engine during operation cannot be dissipated, which will affect the engine's performance, durability, and emissions. Low coolant levels cause the temperature inside the cylinders to rise rapidly. Continuing to drive under these conditions will force the car's components to operate under excessive stress, weakening the strength of parts like the pistons, piston rings, and connecting rods, and even causing them to deform. Additionally, the gaps between parts may be compromised, leading to minor issues like cylinder or bearing damage, or in severe cases, complete engine failure.

13

5

Share

What is the ECON function of the Accord?

ECON is the switch for the car's fuel-saving mode, which can be turned on or off with this button. Modern cars generally offer three driving modes to choose from: Eco mode, Comfort mode, and Sport mode. Below is information about these three modes: Eco mode: When the car is in this mode, fuel consumption is relatively low. The throttle pedal sensitivity decreases, and the transmission shifts up more aggressively. Comfort mode: This mode is considered a normal operating mode for the car. In this mode, the throttle pedal response is more sensitive than in Eco mode. Sport mode: Sport mode can be used during aggressive driving. When activated, the throttle pedal response becomes very sensitive, and the transmission delays shifting. The transmission will only upshift once the engine reaches the redline. In Sport mode, the engine speed is maintained around 3,000 RPM, ensuring better power response during acceleration. When the car enters ECON mode, it achieves reduced fuel consumption and energy savings, but the car's power output is weakened. ECON can be understood as an abbreviation for "economy." In most cases, it is recommended to keep ECON mode enabled. Only when high torque output is required (e.g., climbing a slope) or when driving at very high speeds should ECON mode be turned off. After pressing the ECON button, the car enters a low-carbon, eco-friendly driving mode. The ECU, engine, and transmission then operate intelligently in the most fuel-efficient manner, achieving optimal fuel economy through quick upshifts and smooth acceleration. When the driver presses the throttle pedal deeply, the ECON system effectively controls the opening and closing of the intake valves to ensure smooth engine operation and energy savings. Although ECON mode is simple and effective, it does not work under certain conditions: When the speed exceeds 120 km/h, priority is given to maintaining speed, and the fuel-saving mode automatically deactivates. This means that if the car exceeds the economical speed range (typically between 60-90 km/h), ECON mode will not save fuel. The key to ECON mode is its reliance on computer-controlled operation while driving to be effective. Therefore, it does not work during idle parking or when the car is in N, P, or manual mode. When overcoming significant resistance or requiring high torque output (e.g., climbing a slope), the ECU prioritizes ensuring sufficient power to drive the car, and ECON mode will not function in such cases.

1

0

Share

Can Car-Free Families in Beijing Apply for Gasoline Vehicle Quotas?

Can Four-Stroke Engines Use Two-Stroke Engine Oil?

How Should the Feet Be Positioned in a Manual Transmission Car?

Why are Giti Tires so cheap?

What to Do If Driver's License Expires for a Few Days?

How Long Can You Drive with Low Engine Coolant?

What is the ECON function of the Accord?

What are the physical examination items required before taking the driver's license test?

What Causes Engine Overheating and Loss of Coolant?

What is the function of Casio turbine blades?

What to Do When the Car Steering Wheel Locks and the Car Won't Start?