Can Alcohol Be Placed in the Car?

1 Answers
Jackie
07/29/25 11:43pm
It can be placed, but medical alcohol has a high concentration and is not recommended to be kept inside the car. The following items should not be placed in the car under high temperatures: Mobile phones and chargers: Chargers and mobile phones pose a risk of explosion under high temperatures, presenting a hidden danger. Lighters: Do not casually leave lighters in the car. If you have a lighter, place it in a shaded area to avoid explosions. Reading glasses and magnifying glasses: Reading glasses are convex lenses, no different from magnifying glasses. Sunlight refracted through reading glasses can form a focal point, which may lightly damage the car's interior or, in severe cases, cause a fire.
Was this review help?
5
2
Share
More Forum Discussions

Can a Motorcycle Steering Lock Be Twisted Off?

The structure of the steering lock is designed to be difficult to pry open, thereby enhancing its anti-theft effectiveness. The advantages and effects of this utility model lie in solving the problem of traditional anti-theft locks being easily broken and failing to prevent theft. This utility model features a simple structure, low cost, easy operation, and suitability for industrial production. A steering lock installed in the front fork steerer tube of bicycles, motorcycles, or cars, which is a pin tumbler lock composed of a lock body, lock core, spring, and pins. When locking, the key is used to rotate the lock core out from the lock body, and the lock core fixed on the lock body traverses the front fork steerer tube and the front connecting tube, preventing the front fork steerer tube and the front connecting tube from rotating relative to each other. The lock core is characterized by consisting of a main lock core and a secondary lock core. The front part of the main lock core is a cylindrical structure, with the inner hole of the cylindrical structure serving as the keyhole. Inside the main lock core and the secondary lock core, there is a set of pin holes arranged in a cylindrical structure, with the axes of the pin holes parallel to the axis of the lock core. When the motorcycle steering is forcibly turned while locked, the steering lock mechanism, being relatively fragile, is likely to be damaged, but the steering itself will not break.
2
2
Share

Why can't the dash cam memory card be ejected?

If the dash cam memory card cannot be ejected, it may be due to a damaged memory card or a faulty card reader or peripheral components. Here is some information about dash cams: 1. Introduction: A dash cam is a device that records images, sounds, and other related information during vehicle travel. 2. Function: After installing a dash cam, it can record the entire driving process, including video images and sounds, which can provide evidence for determining traffic accident liability. For those who enjoy self-driving tours, it can also be used to document the process of overcoming difficulties and obstacles. While driving, it continuously records video, capturing time, speed, and location, much like a "black box." 3. Additional Information: The video data from a dash cam should not be edited, as doing so may render it useless in the event of an accident. Installing a dash cam also helps prevent fraudulent claims, such as those involving staged accidents.
7
4
Share

What to Pay Attention to When Picking Up a Motorcycle

What issues should be paid attention to. 1. Appearance: A complete appearance, no scratches on the body, uniform paint, no loose screws, and no missing parts are the most basic requirements. 2. Dashboard self-check: When turning on the ignition switch, the dashboard will automatically perform a self-check to see if the tachometer needle and various indicator lights are functioning properly. 3. Lights: Test the running lights, low beams, high beams, passing lights, left and right turn signals, front and rear brake lights, and hazard lights. It's not just about whether the lights turn on but also testing the integrity of the connecting circuits. If any light doesn't turn on or there's a delay, the dealer is responsible for debugging it. 4. Wiring harness: Check if the wiring harness is neat. If the wiring is not neatly organized, it can not only affect the operation of the handlebars but also cause wear and tear on the wires. For example: Some motorcycles have messy wiring harnesses, which can cause significant wear on the wires during clutch operation while riding. One day, the wire might suddenly break. 5. Oils: Some manufacturers do not fill the motorcycle with sufficient engine oil and brake fluid before leaving the factory. Or, during transportation, due to regulations prohibiting any oil products, the dealer has to add them themselves, resulting in varying quality. For these two reasons, it is essential to check the levels of brake fluid and engine oil when picking up the motorcycle. If there is any deficiency, you can coordinate with the dealer or replace them yourself later.
11
3
Share

How many seats does the Haval H6 have?

Great Wall Haval H6 is a 5-seater vehicle. Here is the extended information: 1. H6 Model: The Haval H6 is positioned as an urban SUV, offering both two-wheel drive and four-wheel drive configurations. The H6 is built on an all-new platform different from the previous H3 and H5 models, with its most notable feature being the use of a monocoque body. The four-wheel-drive version of the H6 employs an on-demand four-wheel-drive system. 2. H6 Configuration: It features an Oriental futuristic aesthetic design language, with exterior lines that vividly highlight dynamic power. The interior adopts a futuristic smart cockpit design. With over a thousand intelligent upgrades, it integrates cutting-edge smart technologies, including full-vehicle FOTA upgrades and support for ultra-L2 level autonomous driving. It boasts 22 intelligent driving assistance functions such as full-scenario AEB automatic emergency braking, 50-meter fully automatic tracking reverse, and smart evasion. Powered by a 1.5GDIT EVO engine, its maximum torque output range is expanded to 1400-3600 rpm, paired with a second-generation 7DCT transmission, achieving a comprehensive transmission efficiency of up to 95.6%. The vehicle upholds the concept of "no compromise on safety," featuring a standard 71.61% high-strength steel body, a hot-formed steel integrated door frame, and 6 airbags, with the hot-formed steel strength reaching up to 2000 MPa.
12
4
Share

Will Fuel Consumption Decrease After the First Maintenance of a New Car?

New car fuel consumption is unrelated to the first maintenance but related to the break-in period. Here is the relevant information: 1. First maintenance: The first maintenance is done at a 4S dealership, where the oil used is the same as the original oil in the car, so there is no change in the oil itself—it just becomes cleaner. Other aspects are just routine checks, and the engine program will not be adjusted via computer; at most, they will check for any fault codes and whether the data is normal. Therefore, fuel consumption is unrelated to the first maintenance itself. 2. Break-in period: Fuel consumption is somewhat related to the break-in period, but it is not significantly tied to the mechanical break-in itself—it has more to do with the driver. Mechanically, during the break-in period, the fit between moving parts is not yet perfect, resulting in relatively higher friction, less smooth movement, and greater resistance, which leads to higher fuel consumption.
15
5
Share

What to Do When Driving License Points Are Reduced to Zero?

If a driving license accumulates zero points within one cycle, the driver must attend a seven-day training course at the local traffic management department of the public security authority. After completing the training, the driver must retake the subject one exam. The process is as follows: the traffic management department of the public security authority will confiscate the driving license; the driver must participate in the study of road traffic safety laws and regulations and take the exam as required; upon passing the exam, the traffic management department will clear the penalty points and return the driving license. After accumulating 12 penalty points on a driving license, the driver must undergo eight hours of daily training on road traffic safety laws and related knowledge. The exam content is the same as that for new driving test applicants. Once the subject one exam is passed, the penalty points on the driving license will be reset to zero, and the traffic management department will return the driving license to the driver. If the exam is failed, the driver must retake the training and exam. Notes on Driving License Penalty Points: If a driving license accumulates 12 penalty points for two consecutive cycles or 24 points in the same cycle, the driver must retake the subject one and subject three exams. Traffic management rules are very strict—any traffic violation by a motor vehicle will result in penalties for the driver. In severe cases, the driving license may even be revoked.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.