Can a Tire Pressure Monitoring System Be Installed on a Car?

2 Answers
DiCarter
07/24/25 1:57pm
Yes, a tire pressure monitoring system can be installed on a car. As the component that directly contacts the ground, tires bear various performance aspects such as driving force and braking force. The tire pressure monitoring system not only serves as an active safety system to prevent tire blowouts caused by excessively high or low tire pressure but also extends tire lifespan, maintains fuel economy, and reduces wear on the suspension system. The tire pressure monitoring system is crucial for driving safety. The installation method for an internal tire pressure monitoring system is as follows: 1. Use a valve core tool to remove the tire valve core; 2. Use a tire changer to squeeze out space near the valve position; 3. After creating space, use a utility knife to cut the original rubber valve from the inside, then use pliers to pull it out from the outside; 4. Install the tire pressure monitoring sensor from the inside to the outside of the tire; 5. Install the washer, ensuring it is placed outside the rim; 6. Secure the fixing screw; 7. Use a tool to tighten the fixing screw of the tire pressure monitoring sensor to approximately 25 Nm.
Was this review help?
10
2
Share
MacJace
08/11/25 7:54am
As an ordinary car owner with 20 years of driving experience, I think installing a tire pressure monitoring system is absolutely feasible and particularly practical. My car didn't come with this system originally, so last year I bought an external set on Taobao and installed it myself in just half an hour. The sensors screw onto the tire valve stems, and the small display sits under the windshield, allowing me to check the pressure values anytime while driving. After installation, it saved me a lot of trouble. Once, the system alerted me to a slow leak in a tire, and I was able to address it in time to avoid a blowout. Maintaining proper tire pressure can also save about 5% on fuel and reduce tire wear. It's simple and inexpensive to install, so I recommend everyone get one, especially for those who frequently drive on highways—safety first. Just remember to choose a durable brand, and replace the batteries every two years to enhance driving peace of mind.
Was this review help?
8
1
Share
Expand All
More Forum Discussions

How to Use the Car Headlight Cleaning Function

Before using the headlight cleaning function, turn the headlight switch to the far right end. Then pull the right-side wiper lever towards you, and both the headlight cleaning and windshield cleaning will activate simultaneously. The headlight cleaning device has a water outlet located below the headlight, allowing you to clean dust and dirt from the headlight at any time. More detailed information is as follows: 1. During nighttime driving or in low-light conditions, rain and dust can reduce the illumination of the headlights by up to 90%, severely impairing the driver's visibility and posing a significant safety hazard. Ensuring adequate headlight illumination and providing clear visibility for the driver becomes a critical issue in such situations. The headlight cleaning system offers a simple and effective solution to this problem. Many countries now legally require cars to be equipped with a front headlight cleaning system. 2. There are two structural types of headlight cleaning systems: 1) Wipe/Wash System: This system is only suitable for glass lenses, as plastic lenses, despite having wear-resistant coatings, are still relatively sensitive to mechanical cleaning. This type of cleaning system can still be found in older-generation car models. 2) High-Pressure Cleaning System: The high-pressure cleaning system is increasingly recognized and can be used on both glass and plastic lenses. The cleaning effectiveness mainly depends on the distance between the nozzle and the lens, the size of the water droplets, the contact angle, the water spray speed, and the volume of water sprayed.
5
5
Share

Can a remote key be duplicated?

Car remote keys can be duplicated. The 4S dealership can retrieve the anti-theft code for key configuration from their database based on the vehicle owner's driving license and ID card. After obtaining this code, the 4S store will require the owner to provide the key tooth profile number to proceed with duplicating a new key. Here is an introduction to car remote keys: There are three working modes for car remote keys, namely active mode, passive mode, and coil induction mode. The car remote key system consists of two parts: the transmitter and the receiver. The transmitter includes components such as the transmission switch, transmission antenna, and integrated circuit. After receiving the signal, the receiver transmits it to the electronic control unit, which then deciphers it. If the input code is correct, it outputs to the control circuit and executes the command.
11
1
Share

How to Turn On and Use the Infiniti QX60 Air Conditioning?

Infiniti QX60's air conditioning can be turned on following these steps: 1. The control switch for the Infiniti QX60 air conditioning is located below the central control screen. Press the CLIMATE button on the far right to turn on the air conditioning, and press the OFF button on the left to turn it off. 2. After turning on the air conditioning, you can directly press the AUTO button to activate the automatic air conditioning. The air conditioning will automatically adjust the temperature based on the cabin's ambient temperature, eliminating the need for manual settings, making it efficient and convenient. 3. You can use the temperature control buttons on the lower left and right sides to adjust the temperature for the driver's and passenger's compartments.
5
0
Share

Is it no longer necessary to display the vehicle inspection sticker?

It is no longer necessary to display the vehicle inspection sticker. Below are the specific details about the vehicle inspection sticker: 1. According to the latest regulations, starting from June 20, 2020, the national motor vehicle inspection qualification mark has been digitized, eliminating the need for paper stickers. Electronic certificates can now be downloaded online. 2. The electronic certificate holds the same validity as the paper certificate. Vehicles that have already received the electronic certificate no longer need to display the paper sticker. Below are the steps for vehicle inspection: 1. Drive the vehicle to the entrance of the inspection station and wait for inspection. 2. Hand over the vehicle to the inspection personnel for testing while the owner waits to retrieve the vehicle. 3. Once the inspection is completed, the staff will issue the inspection report, payment receipt, and attach a copy of the insurance policy. 4. Pay the inspection fee at the service counter, which includes various inspection fees and administrative costs. 5. Submit the required documents to the staff, and within 5 minutes, you can receive the motor vehicle inspection qualification mark and have the secondary page of the vehicle registration certificate stamped.
3
3
Share

What Happens If You Don't Change the Engine Oil for 15,000 Kilometers?

Not changing the engine oil for 15,000 kilometers can lead to issues such as oil thinning, reduced lubrication, and diminished cooling effects. The specific problems are as follows: Oil Thinning: High-quality engine oil has viscosity, which effectively seals the gaps between the cylinder block and pistons to prevent gas leakage. If the oil is not changed for a long time, it will thin out and lose its sealing function. Reduced Lubrication: The lubrication system is crucial for the engine, affecting its performance and lifespan. If the oil is not changed for an extended period, its lubrication effectiveness will significantly decrease. Diminished Cooling Effect: Oil has much higher heat absorption and thermal conductivity than water. If the oil deteriorates severely, its cooling function will be greatly compromised.
16
5
Share

What to Do When Your Car Breaks Down on the Highway?

Here are the solutions for dealing with a car breakdown on the highway: 1. Control the vehicle properly. If a malfunction occurs while driving, the driver should first try to use the vehicle's inertia to move it away from the traffic lane and park it in the emergency stopping area. 2. Turn on the hazard warning lights (double flashers) to alert other drivers to slow down and be prepared to stop. Only exit the vehicle to inspect when it is safe to open the door. 3. Place a triangular warning sign behind the car. The reflective warning sign makes it easier for other drivers to notice. On the highway, the distance should be at least 60 meters. 4. Leave the car with a fire extinguisher in hand. For safety reasons, do not stay inside the car or stand around it while waiting for assistance.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.