···
Log in / Register

Can a smart car be driven on highways?

4 Answers
StKaden
07/25/25 5:25am

The Mercedes-Benz smart can be driven on highways, as there are no national restrictions on small-displacement vehicles using highways. Here is the relevant information: 1. The Mercedes-Benz smart is a small-displacement model. The currently available models include the 2019, 2018, and 2017 versions, which are divided into National V and National VI emission standards. The 2019 Mercedes-Benz smart models all meet the National VI emission standards. The length, width, and height of the 2019 Mercedes-Benz smart are 2695mm, 1663mm, and 1555mm respectively, with a wheelbase of 1873mm. 2. The 0.9T version engine has a maximum output power of 66 kilowatts, a maximum torque of 135 N·m, a top speed of 155 km/h, a 0-100 km/h acceleration time of 11.3 seconds, and a combined fuel consumption of 4.4L/100km as announced by the Ministry of Industry and Information Technology. The 1.0L version engine has a maximum output power of 52 kilowatts, a maximum torque of 91 N·m, a top speed of 151 km/h, a 0-100 km/h acceleration time of 15.5 seconds, and a combined fuel consumption of 4.5L/100km as announced by the Ministry of Industry and Information Technology.

Was this review help?
3
0
Share
MacBenjamin
08/11/25 12:44pm

As a young driver who has been driving a Smart car for a long time, I find it completely fine to drive on the highway, and I even quite enjoy it. Although the Smart model is small and cute, it was designed with both urban and highway scenarios in mind—power-wise, models like the Fortwo typically have over 60 horsepower, which is sufficient for stable cruising at legal speeds. Safety is also not a major concern, as the car body is sturdy and equipped with ABS and airbags. I once drove from Shanghai to Nanjing on the highway and didn’t feel unstable even when encountering large trucks. Of course, you might notice some wind resistance, and the body may bounce a bit at higher speeds, but maintaining a safe distance is all you need. Fuel efficiency is a highlight—it’s low in city traffic but might be slightly higher on the highway, averaging around 5-6 liters per 100 kilometers, making it economical for long-term use. In short, as long as it’s not extreme stormy weather, feel free to take it on the highway, and just step on the gas a bit more when overtaking.

Was this review help?
19
0
Share
Expand All
DanteMarie
09/27/25 4:45am

As a seasoned commuter, I find the Smart car perfectly capable on highways, with a greater focus on practical driving convenience. Its compact size makes parking a breeze, yet it maintains stable handling at high speeds—contrary to some concerns about rollovers. With over a decade of driving experience across various road conditions, I can attest that the Smart's suspension system performs admirably. Legally, it qualifies as a standard motor vehicle meeting all road requirements, requiring no special permits. Economically, its advantages are clear: low fuel consumption and minimal maintenance costs save significant monthly expenses compared to larger vehicles. My only advice is to maintain a moderate speed, ideally between 80-100 km/h, avoiding reckless speeding, and slowing down in crosswinds. Packing snacks in the trunk enhances comfort on long trips, making highway driving both safe and efficient.

Was this review help?
18
4
Share
Expand All
KiraDella
11/10/25 6:44am

From a safety advocate's perspective, driving a Smart car at high speeds is entirely feasible, with the key being an understanding of its design and precautions. The lightweight body may be affected by crosswinds or aerodynamic drag on windy days at high speeds, but the ABS and ESP systems ensure handling stability. I always remind myself to maintain a safe speed under 120 km/h when driving. Regulations permit compact cars to use highways normally without special restrictions. Regarding safety concerns like being susceptible to bow waves from large vehicles, optional stability control packages are available – modern Smart cars come with these as standard. From an economic standpoint, it's fuel-efficient and eco-friendly, saving money long-term while reducing emissions. In summary, with reasonable use, it's more reliable than you might think. Just avoid forcing trips in severe weather, and checking tire pressure and lights before each highway journey adds peace of mind.

Was this review help?
19
3
Share
Expand All
More Forum Discussions

What is the reason for high low pressure and normal high pressure in car air conditioning?

Car air conditioning with high low pressure and normal high pressure is caused by: malfunction or damage of the air conditioning expansion valve. The solution for high low pressure and normal high pressure in car air conditioning is: remove the air conditioning expansion valve and check whether its working condition is normal. If it is indeed found to be faulty or damaged, simply replace it. Car air conditioning, short for car air conditioning device, is used to adjust and control the temperature, humidity, air cleanliness, and air flow inside the car compartment to an optimal state. Its functions are: 1. Provide a comfortable riding environment for passengers and reduce travel fatigue; 2. Create good working conditions for the driver and ensure driving safety.
7
5
Share

What is the tire model of the Volkswagen Tharu 280?

The Volkswagen Tharu 280 has three tire size models: 225/60R16, 225/55R17, and 225/50R18. The first number 225 represents the tire width of 225MM, 60 indicates the tire's aspect ratio is 60%, meaning the section height is 60% of the width, the letter R stands for radial tire, and 16 denotes the rim diameter of 16 inches. The Volkswagen Tharu 280 has a top speed of 200km/h and a fuel consumption of 5.9L per 100km. In addition to the model, the tire also carries the following common data: Tire cord material: indicated by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent the certified speed ratings of the tire from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: indicates the rim specification compatible with the tire for practical use, such as standard rim 5.00F.
12
0
Share

Where is the Air Conditioning Filter of Luxgen Located?

Luxgen's air conditioning filter is located behind the glove box on the passenger side. If you want to replace the air conditioning filter, you need to remove the glove box. The air conditioning filter is a type of filter installed in the car's air conditioning system, which can absorb dust particles, alleviate respiratory pain, reduce irritation for allergy sufferers, and protect the air conditioning cooling system. Luxgen's models include: the 7 SUV, U6 SUV, 5 Sedan, Luxgen URX, and 7 MPV. Taking the 2020 Luxgen URX as an example, it belongs to the compact SUV category, with body dimensions of: length 4725mm, width 1826mm, height 1765mm, a wheelbase of 2720mm, a fuel tank capacity of 55 liters, and a trunk capacity of 942 liters.
4
4
Share

What are the reasons for a car stalling immediately after ignition?

The reasons for a car stalling immediately after ignition are: 1. Use of unqualified fuel; 2. Blocked fuel lines; 3. Faulty spark plugs; 4. Abnormalities in the fuel injector or fuel filter; 5. Poor contact in wiring connectors; 6. Insufficient driving skills; 7. Short circuit or power failure in the engine or car computer; 8. Releasing the clutch too quickly when starting or going uphill; 9. Low fuel pressure from the fuel pump; 10. Poor operation of the idle speed control system. The solutions for a car stalling immediately after ignition are: 1. Clean the throttle body, intake manifold, and fuel injector; 2. Inspect and repair the ignition coil; 3. Add fuel; 4. Check the fuel pressure regulator and fuel lines.
1
0
Share

What are the functions of a clutch?

The functions of a clutch include: 1. Gradually increasing the driving force of the vehicle to ensure smooth starting; 2. Temporarily separating the engine and transmission for gear shifting; 3. Preventing overload in the transmission system; 4. Reducing torsional vibration impacts from the engine, thereby extending the lifespan of transmission gears. The working principle of a clutch is: 1. When the inner race is fixed, the outer race can rotate freely in the clockwise direction as the wedges do not lock; 2. When the outer race rotates counterclockwise, the wedges lock, preventing the outer race from rotating. Severe clutch wear can lead to: 1. Vehicle slippage and insufficient power; 2. Difficulty in starting the vehicle or ignition problems; 3. Poor climbing performance and increased fuel consumption.
19
0
Share

How to Replace the Battery in a Nissan Tiida Remote?

To replace the battery in a Nissan Tiida remote, follow these steps: 1. Slide the small switch on the back of the key. 2. Pull out the mechanical key by gripping the top part and pulling it outward. 3. After removing the mechanical key, you will see a small groove. Use a flathead screwdriver or another tool to pry open the key cover along the groove. Once a gap is created, manually open it. 4. After opening the key cover, remove the old battery and replace it with a new one. Taking the 2020 Tiida as an example, it is a compact SUV with the following dimensions: length 4393mm, width 1766mm, height 1539mm, wheelbase 2860mm, minimum ground clearance 173mm, and fuel tank capacity 52l.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.