Can a small spoiler pass the annual inspection?

3 Answers
StLila
07/23/25 11:57pm
Adding a spoiler to a car will not pass the annual inspection. During the annual vehicle inspection, the vehicle will be checked for modifications, alterations, or transformations. The inspection will verify if the vehicle's registration, license plate, and vehicle records match the actual condition of the vehicle and if any changes have been made, as well as whether the necessary approval and modification procedures have been completed. Unless the vehicle has undergone modifications, alterations, or technical transformations without the required approval and modification procedures. Relevant information about the annual vehicle inspection is as follows: Introduction: The annual vehicle inspection is a mandatory test for every vehicle that has obtained an official license plate and registration certificate. It is equivalent to an annual physical examination for the vehicle according to the "Technical Conditions for the Safe Operation of Motor Vehicles." Purpose: The annual vehicle inspection can promptly eliminate potential safety hazards, encourage better vehicle maintenance, and reduce the occurrence of traffic accidents.
Was this review help?
7
1
Share
DiMadison
08/10/25 7:39pm
I added a small spoiler to my car and surprisingly passed the annual inspection, but this isn’t absolute—it depends on the region and specific regulations. In my city, where enforcement is relatively lax, the small spoiler wasn’t flagged as an issue. However, legally speaking, any modification counts as altering the vehicle’s structure and could be classified as non-compliant. The spoiler was mainly for aesthetics, but if installed poorly, it could disrupt aerodynamics, leading to unstable driving or increased fuel consumption. My advice: if you really want one, opt for a small, low-profile design, ensure it’s securely installed, and check with the local DMV about registration requirements before the inspection to avoid last-minute removal hassles. While small spoilers often slip through, for peace of mind, it’s best to avoid unnecessary exterior modifications.
Was this review help?
4
4
Share
Expand All
ZoeyMarie
09/23/25 8:21am
Adding a small spoiler is quite trendy, and I've thought about it too. In most cases, it can pass the annual inspection. For example, installing a slightly curved spoiler on a regular car that doesn't alter the original design might not even catch the inspector's attention. However, it's important to note that modifications involve safety risks. If the spoiler is loose or obstructs the rearview mirror, it could lead to accidents. A friend of mine installed one and almost failed the inspection because local regulations were stricter than expected. My advice is to use genuine parts for installation and avoid anything too flashy. While modifications look cool, it's not worth the trouble or compromising road safety over such a small accessory.
Was this review help?
12
1
Share
Expand All
More Forum Discussions

What Causes a Motorcycle to Keep Stalling?

The reasons for a motorcycle stalling include engine overheating and electrical circuit malfunctions. Below are detailed explanations of the causes: Engine Overheating: Excessive temperature and poor lubrication can cause the piston and cylinder to seize, leading to stalling. Signs before stalling include a gradual decrease in power followed by a sudden halt. After diagnosis, the first step is to check if there is lubricating oil in the crankcase. If the oil level is low or absent, inspect the oil pan or drain plug for leaks. Address any issues found and refill with the specified lubricating oil. If leakage is not the issue, check if the lubricating oil has been excessively consumed and replenish or replace it promptly. Electrical Circuit Malfunction: Sudden stalling caused by an abrupt electrical circuit failure will not show any prior engine abnormalities. Common causes of sudden electrical failure include loose or disconnected connectors, cut wires, or short circuits. For example, a faulty ignition coil may cause intermittent sparks due to loose connections. Inspect all connectors, clean off any oil residue, and enhance the clamping force of the connector clips and sockets to ensure stable contact. A faulty trigger coil with loose lead connections may also cause intermittent sparks. Strengthen the soldering of the leads and eliminate any potential cold solder joints.
13
0
Share

Will External Tire Pressure Monitoring Cause Air Leakage?

External tire pressure monitoring will not cause air leakage. If air leakage occurs, it indicates that the interface of the external tire pressure monitoring device is damaged. Tire pressure monitoring involves recording the rotation speed of the tires or using electronic sensors installed inside or outside the tires to automatically monitor various conditions of the tires in real time, providing effective safety assurance for driving. Its functions include: 1. Preventing accidents; 2. Extending the service life of tires; 3. Reducing wear on the suspension system. The method to reset the tire pressure monitoring is: 1. Ensure that the vehicle's tire pressure is within the normal range; 2. Park the vehicle on a level surface and turn off the engine; 3. Power on the vehicle, press and hold the tire pressure monitoring button, and after 5 seconds, you will hear an alarm sound, then release the button to complete the reset successfully.
20
4
Share

What is the cleaning method for sludge inside the engine?

Engine internal sludge cleaning method is: 1. Use specialized sludge cleaning oil; 2. Drain all engine oil; 3. Add cleaning oil to the engine, let it idle for 15 minutes, then drain the cleaning oil. Engine maintenance methods include: 1. Use qualified engine oil; 2. Use qualified coolant; 3. Regularly clean radiator scale; 4. Regularly remove engine carbon deposits; 5. Replace air filter, oil filter, and fuel filter on time; 6. Check spark plug condition; 7. Maintain normal engine speed.
9
1
Share

What Does Brake-by-Wire Mean?

Brake-by-wire system refers to an electronically controlled braking system, which is divided into mechanical brake-by-wire systems and hydraulic brake-by-wire systems. Mechanical Brake-by-Wire System: The mechanical brake-by-wire system (EMB for short) is fundamentally different from conventional hydraulic braking systems. EMB uses electrical energy as its power source, driving the brake pads via an electric motor. Energy is transmitted through wires, and signals are conveyed via data lines. EMB is a type of brake-by-wire system. The entire system lacks connected brake pipelines, featuring a simple structure and compact size. Signals are transmitted electrically, ensuring quick response, reduced braking distance, stable operation, and easy maintenance. Without hydraulic oil pipelines, there are no issues of hydraulic oil leakage. Direct control via ECU makes it easy to implement functions such as ABS, TCS, ESP, and ACC. Hydraulic Brake-by-Wire System: EHB evolved from traditional hydraulic braking systems but differs significantly from conventional braking methods. EHB replaces some mechanical components with electronic ones, forming an advanced electromechanical system that integrates electronic and hydraulic systems. EHB mainly consists of an electronic pedal, an electronic control unit (ECU), and a hydraulic actuator. The electronic pedal is composed of a brake pedal and a pedal sensor (pedal displacement sensor). The pedal sensor detects the pedal stroke, converts the displacement signal into an electrical signal, and transmits it to the ECU, enabling proportional control of pedal stroke and braking force.
12
5
Share

What Type of Vehicle is an MPV?

MPV stands for Multi-Purpose Vehicle, and its models include: Buick GL8, Honda Odyssey, Wuling Hongguang S1.5E, Baojun 730, Mercedes-Benz V260, etc. Taking the 2020 Mercedes-Benz V260 as an example, its body dimensions are: length 5140mm, width 1928mm, height 1880mm, with a wheelbase of 3200mm. The 2020 Mercedes-Benz V260 features a MacPherson independent front suspension and a semi-trailing arm independent rear suspension. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 211PS, a maximum power of 155kW, and a maximum torque of 350Nm, paired with a 9-speed automatic transmission.
9
0
Share

Which Buick model is the Excelle?

Excelle is the Buick Excelle, a compact car. Taking the 2020 Buick Excelle as an example, its body dimensions are: length 4468mm, width 1765mm, height 1469mm, wheelbase 2611mm, fuel tank capacity 40l, and curb weight 1070kg. The 2020 Buick Excelle features a front MacPherson independent suspension and a rear compound torsion beam non-independent suspension. It is equipped with a 1.3L naturally aspirated engine, delivering a maximum horsepower of 107ps, maximum torque of 133nm, and maximum power of 79kw, paired with a 5-speed manual transmission.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.