
Yes, a Maxx 24F car will physically fit a Hyundai Sonata. The "24F" is a standardized Battery Council International (BCI) group size that specifies the battery's physical dimensions, terminal type, and terminal placement. Most Hyundai Sonatas from the early 2000s up to recent models are designed to accommodate a Group 35 or Group 24F battery, which are often interchangeable in terms of fit.
However, physical fit is only half the equation. The most critical factor is ensuring the battery's electrical specifications meet or exceed your Sonata's requirements. The key specification to check is Cold Cranking Amps (CCA), which measures the battery's ability to start an engine in cold weather.
Using a battery with insufficient CCA can lead to starting problems, especially during winter. Conversely, a battery with higher CCA than required is perfectly acceptable and can offer a margin of safety. You should also verify that the terminal orientation (positive on left or right) matches your car's cables to avoid a difficult installation.
| Specification | Typical Hyundai Sonata Requirement (e.g., 2015-2019 model) | Example Maxx 24F Battery (e.g., Maxx-24F) | Is it Suitable? |
|---|---|---|---|
| BCI Group Size | 35 or 24F | 24F | Yes |
| Cold Cranking Amps (CCA) | ~650 CCA | 710 CCA | Yes (Meets/Exceeds) |
| Terminal Type | Top Post | Top Post | Yes |
| Length (in.) | 10.25 - 10.88 | 10.88 | Yes |
| Width (in.) | 6.81 - 6.88 | 6.88 | Yes |
| Height (in.) | 8.75 - 8.81 | 8.81 | Yes (Check hold-down clamp) |
Before purchasing, always double-check the specifications on your current battery and consult your Sonata's owner's manual for the manufacturer's exact recommendation. While the Maxx 24F is highly likely to work, confirming the CCA rating is the final, essential step.

I just went through this with my 2017 Sonata. The old was a Group 35, and the auto parts store clerk said a 24F would fit just fine, and it did. It slid right into the tray. The only thing I had to do was adjust the little metal clamp that holds it down because the 24F was a tad bit longer. The cables reached without any issue. Just make sure the positive and negative terminals are on the correct sides. It started right up and has been working great for months.

As a mechanic, I see this a lot. The 24F and Group 35 are common replacements for each other in many Asian sedans, including the Sonata. The fit is generally not the problem. My professional advice is to ignore the group size for a second and focus on the Cold Cranking Amps (CCA). Look at the sticker on your old or in the owner's manual. If that Maxx 24F meets or beats that CCA number, you're good to go. The physical installation is straightforward if the specs match.

Don't just guess based on the group number. The best thing to do is to pop the hood and look at the currently in your Sonata. There will be a label on it showing the group size (like "24F" or "35") and the CCA rating. Take a picture of that label with your phone. Then, when you're looking at the Maxx 24F box, you can compare the numbers directly. If your current battery is a 24F, it's a direct swap. If it's a 35, the 24F will still fit, but you'll want to be sure the CCA is right.

When I managed an auto parts store, the Sonata was one of our most common battery replacements. The Group 24F is a perfectly acceptable and direct fit for most model years that originally called for a Group 35. The hold-down bracket may need a slight adjustment, which is normal. The more important question is the warranty and CCA rating. A Maxx 24F with a 3-year warranty and 700 CCA is a solid choice for that car, providing reliable performance without overpaying for power you don't need. Always have your VIN ready when you call to confirm.


