Can a Car Ignition Coil Be Replaced Individually?

What is the fuel tank capacity of the Great Wall Fengjun 5 in liters?

The fuel tank capacity of the Fengjun 5-2021 1.5T two-wheel drive dry rice version super value type with a 1820mm cargo box is 70L. The engine is a 1.5L turbocharged engine, and the transmission is a 5-speed manual transmission (MT). The drive method is front-engine rear-wheel drive. The front suspension type is a double-wishbone torsion bar spring independent suspension, and the rear suspension type is a leaf spring non-independent suspension. In the same class of vehicles, the fuel tank capacity of the Rich-2021 2.4L gasoline two-wheel drive startup version base model 2TZD is 60L. During the actual refueling process, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity marked by the car manufacturer is from the bottom of the tank to the safe limit, and there is still some space from the safe limit to the tank opening. This space is to ensure that the fuel in the tank expands when the temperature rises without overflowing the safe space of the tank. If the fuel is filled to the tank opening during refueling, the actual refueling amount will be larger than the calibrated fuel tank capacity. If the owner wants to know the remaining fuel in the tank, they can observe the fuel gauge on the right side of the dashboard, which is marked with E and F. When the pointer is close to E, it means the fuel is almost empty, and when it is close to F, it means the fuel is sufficient.

1

0

Share

Where is the van radiator located in the car?

The radiator is generally positioned behind the air conditioning condenser. When opening the engine compartment, only the upper cover of the radiator is visible. The exact location of the radiator can only be clearly seen after removing the front bumper assembly. Below are relevant details: 1. The car radiator, also known as the heat exchanger, is a key component in the vehicle's cooling system, functioning to dissipate heat. It typically features a large square or rectangular shape with densely packed aluminum or copper fins. 2. While the radiator itself usually lacks markings, its filler neck often displays warning symbols. Common indicators include "Caution when opening" or "Beware of burns," sometimes accompanied by a thermometer graphic with steam emission symbols. Other variations may show an open book icon with an exclamation mark. Various designs exist. The radiator requires long-life antifreeze coolant, which serves multiple purposes beyond freeze protection, including rust prevention and other functions.

6

3

Share

How to adjust the time on a Volkswagen Polo?

To adjust the instrument panel time on a Volkswagen Polo, follow these steps: 1. Ensure the vehicle is in the started state. 2. Press the down button on the steering wheel to select the clock option. 3. Enter the clock adjustment page. 4. Use the up and down buttons to adjust the time, then press the OK button to confirm. Additional information: Automotive instrument panel indicator lights are divided into three categories: 1. Indicator lights. Examples include lighting signal lights, turn signal lights, parking lights, etc. Their function is to indicate the status of various vehicle features. 2. Warning lights. These serve as alerts, such as the fuel indicator light, door status indicator light, seat belt indicator light, etc. Generally, warning lights turn off after the driver performs the corresponding action. For example, the seat belt indicator light turns off once the driver fastens the seat belt. 3. Fault indicator lights, which are the most important indicators. Examples include the generator fault indicator light, ABS fault indicator light, transmission fault indicator light, etc.

5

2

Share

Where is the horn wire of the Sylphy located?

The horn wire of the Sylphy is located under the steering wheel airbag. It is recommended to have it repaired by professionals, as the clock spring under the steering wheel is prone to breakage. Relevant details are as follows: 1. The brown wire is the horn wire, usually connected to the upper and lower horns. Do not cross the connections, as this may burn out the audio amplifier. Generally, the connections are front left, front right, rear left, and rear right. You can use the ohmmeter function of a multimeter to distinguish them—momentary power will produce a buzzing sound, helping to identify the positions of the four horns. The main reasons for a car horn not working or sounding hoarse include insufficient battery charge, damaged horn relay or button, or a faulty horn. 2. Check the power system: Turn on the headlight switch. If the headlights do not light up or are dim, start the engine and slightly increase the throttle. If the headlights then function normally and the horn sounds, the issue is likely insufficient battery charge. If the headlights are functioning normally, press the horn button and check if the relay makes a clicking sound. If it does, the problem may be a faulty horn or poor grounding. In such cases, replace the horn assembly or fix the grounding issue.

18

0

Share

What is the displacement of the Audi S3?

Audi S3 is equipped with a 2.0-liter turbocharged engine across the entire lineup, so the displacement of this car is 2.0 liters. Below is some relevant information about the Audi S3: 1. The Audi S3 is a high-performance model under the Audi brand, and it has gained popularity among performance car enthusiasts and tuning enthusiasts since its launch. 2. The Audi S3 uses Volkswagen's third-generation EA888 engine, which delivers 290 horsepower and a maximum torque of 380 Nm. The engine can output maximum power at 5,400 to 6,500 rpm and maximum torque at 1,850 to 5,300 rpm. This engine features hybrid injection technology and utilizes an aluminum alloy cylinder head with a cast iron cylinder block. The cast iron cylinder block can withstand higher temperatures and pressures, giving this engine high tuning potential. The engine is paired with a 7-speed dual-clutch transmission.

13

0

Share

What Are the Differences Between Joint Venture and Domestic Cars?

Domestic cars have gaps compared to joint venture cars in terms of manufacturing technology and processes. Below is a detailed introduction: 1. Joint venture cars, as the name suggests, are projects jointly established by Chinese and foreign investors. 2. The Chinese side contributes by providing land, factory usage rights, and capital, while the foreign investors contribute brand, technology, capital, talent, etc. Joint venture cars are the products of such collaborations. Foreign partners provide technology, talent, and brands for assembly in China, but the core technology remains under foreign control. 3. Domestic cars refer to vehicles designed and manufactured by Chinese people, with independent intellectual property rights and Chinese brands. Although domestic cars have developed rapidly in recent years, there is still a certain technological gap compared to joint venture brands. After all, joint venture cars have dominated the market for many years, and their core technologies are more mature. Domestic cars still need to make further progress in core technologies to establish a firm foothold in the automotive market.

6

4

Share

Can a Car Ignition Coil Be Replaced Individually?

What is the fuel tank capacity of the Great Wall Fengjun 5 in liters?

Where is the van radiator located in the car?

How to adjust the time on a Volkswagen Polo?

Where is the horn wire of the Sylphy located?

What is the displacement of the Audi S3?

What Are the Differences Between Joint Venture and Domestic Cars?

What to Do When Your Car is Blocked and You Can't Find the Owner?

What tires are best for the Tiguan?

What engine does the Great Wall Haval H9 have?

How many colors does the Jetta VS5 have?