Can a 17-seater yellow-plate vehicle be driven with an A2 driver's license?

Is the BMW M3 a Sports Car?

BMW M3 is not a sports car. Here are the specific details about the BMW M3: 1. Exterior: It features a frameless new vertical double-kidney grille for the first time, with a double-line design. The slim laser headlights point directly at the double-kidney grille, combined with a large trapezoidal central air intake and air vents with fins. The front face of the car adopts a frameless design for the first time, paired with slim laser headlights and a large trapezoidal central air intake. 2. Interior: The BMW M3 seats are designed for comfort, with electrically adjustable side bolsters. The doors are also upholstered in soft and smooth Nivillo leather. The dashboard adopts the M-style commonly seen in sports cars, with a top speed limit of 330 KM/h.

4

0

Share

What to Do When Your Parked Car Gets Scratched on the Roadside?

First, call the police immediately and provide them with the approximate time, location, and details of the incident. Also, check if there are any surveillance cameras nearby. If you spot one, note its number and inform the police, who will then assist in locating the responsible vehicle. Be patient while waiting for the results. Below are some relevant details: 1. Filing a lawsuit for hit-and-run: There are two scenarios to consider. The first is when the other party is unaware they scratched your car; the second is when they knowingly caused the damage and intentionally fled. You cannot sue for hit-and-run in the first scenario, but you can in the second. 2. Parking precautions: Whenever possible, choose official parking lots. If none are available, opt for areas with surveillance cameras. Additionally, avoid parking in narrow spaces; following marked parking lines is the safest approach.

6

2

Share

What needs to be replaced during annual car maintenance?

During annual car maintenance, engine oil and oil filters generally need to be replaced; the most frequent car maintenance task is washing the car; the most important areas to regularly inspect are tire surfaces and pressure, oil level, coolant level, and brake fluid level. Regular car maintenance typically involves replacing: 1. Engine oil and oil filter: Engine oil and oil filters basically need to be replaced during every maintenance service. Car engine oil is generally divided into three types: mineral oil, semi-synthetic oil, and fully synthetic oil, each with different replacement cycles. 2. Coolant: Car coolant not only provides antifreeze protection but also helps cool the engine during operation by dissipating high temperatures. In winter when temperatures are low, coolant prevents low-temperature damage to the engine. Generally, coolant needs to be replaced every three years or 50,000 kilometers. 3. Windshield washer fluid: Windshield washer fluid is mainly used to clean dirt from the windshield and needs to be replenished when empty. During winter use, it is recommended to add antifreeze windshield washer fluid to prevent freezing and damage to the washer fluid reservoir, which could affect normal usage. 4. Cabin air filter: The cabin air filter helps purify incoming air, ensuring clean airflow from the air conditioning system. Generally, it needs to be replaced every 1 to 2 years. 5. Brake fluid: Brake fluid has different characteristics compared to other fluids. It is hygroscopic, meaning it easily absorbs moisture during use. When brake fluid absorbs water, it can form bubbles, leading to softer brakes and longer stopping distances. It is recommended to replace brake fluid every 2 years to prevent braking abnormalities and ensure driving safety.

9

3

Share

Is the Lynk & Co 03 a four-wheel drive?

The Lynk & Co 03 is a four-wheel drive vehicle. More details about this model are as follows: 1. Rear Design: The "L"-shaped taillights and dual round exhaust pipes are similar to those of the concept car, giving it high recognition. 2. Platform: The Lynk & Co 03 will be built on the CMA platform jointly developed by Geely and Volvo, making it the first sedan model under the Lynk & Co brand. 3. Powertrain: The Lynk & Co 03 is expected to offer a choice between a 1.5T three-cylinder and a 2.0T four-cylinder engine. The 1.5T direct-injection engine paired with a 7-speed dual-clutch transmission delivers a maximum power of 132kW (179Ps) and a peak torque of 265N·m, matched with a 7-speed dual-clutch transmission.

15

3

Share

What is the normal temperature for a vehicle's water temperature?

The water temperature gauge ranges from 0-130°C, with the normal temperature being 90°C in the middle. When the water temperature stabilizes at 90°C, it indicates that the engine's temperature has stabilized and reached its optimal working condition. Here is some additional information: 1. Water temperature refers to the coolant temperature: Water temperature actually refers to the temperature of the coolant. Inside the engine, apart from oil passages, there are also coolant passages. The full name of the coolant is antifreeze coolant, and its most important function is to cool and lower the engine's temperature while preventing freezing in winter. Additionally, coolant usually also has anti-rust and anti-corrosion properties. In the cooling system, there are both metal and non-metal materials, and the anti-rust and anti-corrosion properties of the coolant help slow down the aging of the entire cooling system. 2. When the water temperature is too high: During daily driving, situations where the water temperature is too high can occur. Many experienced drivers immediately turn off the engine when they notice the water temperature is too high, which is incorrect. This is because the water cooling system requires the engine to be running to function. Once the engine is turned off, the water pump loses power, and the coolant can no longer circulate. Meanwhile, the engine components are still in a high-temperature environment, which not only fails to cool them down but may also damage engine parts. The correct approach is to let the engine idle for a few minutes, adjust the air conditioning to the warm air setting, turn the fan to maximum, and open the hood to help dissipate heat. Only after the water temperature has dropped should the engine be turned off.

6

2

Share

Is it harmful to mix 92 and 95 gasoline in a car?

Mixing 95 and 92 gasoline is harmful to the car. Occasionally using the wrong gasoline grade only requires switching back to the correct grade after use, but long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower-grade gasoline, accidentally using higher-grade gasoline will not cause damage, but the increase in octane number will change the fuel's ignition point, leading to delayed combustion in the engine. This means the engine's power output and thermal efficiency will decrease, resulting in poorer performance. For vehicles recommended to use higher-grade gasoline, using lower-grade gasoline can cause engine knocking. Because the octane number is too low, the gasoline's ignition point decreases, causing it to ignite prematurely during the compression stroke. If the gasoline ignites before the spark plug fires during the compression stroke, resistance will occur during the upward stroke. This resistance makes the engine run very unstable. If the knocking is mild, it only increases noise and does not significantly damage the engine. However, if the knocking is severe, it indicates the engine's condition is very serious. The vibration not only affects driving stability but also causes abnormal wear on the pistons and cylinders, and in severe cases, can lead to cylinder scoring. In addition to checking the appropriate gasoline grade in the car's manual, you can also find it on the fuel tank cap. Usually, the gasoline grade can also be determined based on the engine's compression ratio. Cars with an engine compression ratio between 8.6-9.9 should use 92 gasoline, those between 10.0-11.5 should use 95 gasoline, and those with higher compression ratios should use 98 gasoline. However, with the use of new technologies, the compression ratio alone cannot determine the gasoline grade. Engines with high compression ratios can also be tuned to use lower-grade gasoline. Besides the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline grade, the higher the octane number and the better the anti-knock performance. 92 gasoline contains 92% isooctane and 8% n-heptane, while 95 gasoline contains 95% isooctane and 5% n-heptane.

2

Share

Can a 17-seater yellow-plate vehicle be driven with an A2 driver's license?

Is the BMW M3 a Sports Car?

What to Do When Your Parked Car Gets Scratched on the Roadside?

What needs to be replaced during annual car maintenance?

Is the Lynk & Co 03 a four-wheel drive?

What is the normal temperature for a vehicle's water temperature?

Is it harmful to mix 92 and 95 gasoline in a car?

Is a 7-Speed Dual Clutch an Automatic Transmission?

Is Buying a Car Only Possible at 4S Stores?

How to Charge a Dead Battery?

What engine and transmission are used in the Geely Boyue?