Body Dimensions of the Sixth Generation Golf?

1 Answers
McOscar
09/08/25 6:29am
The length, width, and height of the sixth-generation Golf are 4199 mm, 1786 mm, and 1479 mm respectively, with a wheelbase of 2578 mm. More details about the sixth-generation Golf are as follows: 1. The sixth-generation Golf is equipped with two engines in total, one is a 1.6-liter naturally aspirated engine, and the other is a 1.4-liter turbocharged engine. 2. The 1.4-liter turbocharged engine delivers 131 horsepower and a maximum torque of 220 Nm. This engine can output maximum power at 5000 rpm and maximum torque between 1750 and 3500 rpm. It features direct fuel injection technology and uses an aluminum cylinder head with a cast iron cylinder block. 3. The 1.6-liter naturally aspirated engine produces 105 horsepower and a maximum torque of 155 Nm. This engine can output maximum power at 5600 rpm and maximum torque at 3500 rpm. It is equipped with multi-point fuel injection technology and uses an aluminum cylinder head with a cast iron cylinder block.
Was this review help?
18
1
Share
More Forum Discussions

In which seasons should 15w40 and 20w50 engine oils be used?

15w40 and 20w50 engine oils are used in summer. The number after "W" represents the viscosity index of the oil at high temperatures. The higher the number, the higher the viscosity. Higher viscosity provides better protection for the engine. Introduction to engine oil: Engine oil, also known as motor lubricant, is composed of base oil and additives. The base oil is the main component of the lubricant, determining its basic properties, while additives compensate for and improve any shortcomings in the base oil's performance. Functions of engine oil: Reduces friction and high temperatures; cools and lowers temperature; cleans and purifies; dampens vibrations; prevents rust and corrosion. Differences between 15w40 and 20w50 engine oils: Viscosity differs: The viscosity of 15w40 oil ranges between 13.5 and 16.0; the viscosity of 20w50 oil ranges between 16.5 and 20.0. Pour point differs: The pour point of 15w40 oil is around minus twenty-five degrees Celsius; the pour point of 20w50 oil is around minus nineteen degrees Celsius.
6
1
Share

Why does the car suddenly start shaking?

Sudden shaking of the car may be caused by issues in the fuel system, electrical system, or mechanical components. Fuel system problems: Fuel system issues are generally caused by clogged fuel lines, leading to poor fuel supply, manifested as engine shaking, unstable idling, or stalling while driving. Additionally, fuel pump failure can also cause engine shaking. To diagnose fuel pump issues, disconnect the fuel line and check the flow rate and volume of fuel. Electrical system problems: Check if the ignition timing is accurate, as abnormal ignition is usually a timing issue. Inspect whether the spark plugs have aged, if the gaps are uniform, and if there are any changes in the gaps. Also, malfunctioning of the distributor can cause engine shaking. Mechanical reasons: Check the engine's operating condition for any abnormal sounds, such as valve noises. Inspect the belt's working condition to see if it is loose.
16
5
Share

What are the precautions for tire storage?

Tire storage precautions: Do not stack randomly, pay attention to placement position, and avoid direct sunlight. Do not stack randomly: For tire storage, it is essential to use storage racks rather than stacking them haphazardly on the ground. Using racks makes it easier to access the tires and keeps the overall appearance tidy, preventing the tires from getting dirty or messy. Pay attention to placement position: The most important aspects of tire storage are avoiding direct sunlight and rain exposure. No matter how high-quality the rubber product is, prolonged exposure to sunlight will cause it to gradually age, and rain exposure can lead to corrosion or oxidation to some extent. Therefore, it is crucial to store tires in a shaded and dry place. Do not expose to direct sunlight: Whether stacked or stored on racks, the position of the tires should be adjusted regularly. Since tires are rubber products, they can deform over time if their position is not changed during storage. Therefore, it is necessary to rotate and adjust their positions regularly, at least once a month.
19
5
Share

Is the Surround View System the Same as a Dash Cam?

The differences between a surround view system and a dash cam include: different functional focuses, different recording angles, and different monitoring durations. Different functional focuses: A dash cam is a device used to record driving conditions and store video footage, primarily for capturing images during driving. A surround view system, on the other hand, is an auxiliary device for reversing, used to observe blind spots around the vehicle. Different recording angles: A dash cam is installed on the front windshield and typically has only one camera, recording only the front view of the vehicle. In contrast, a surround view dash cam has four cameras, recording the front, rear, left, and right sides of the vehicle, with seamless stitching of the four views. Different monitoring durations: A surround view system can continue working after the vehicle is parked and turned off, recording parking conditions 24/7. A dash cam's recording duration depends on the battery capacity.
14
2
Share

Which is louder, full exhaust or mid-pipe and rear section?

When modifying exhaust systems of the same level, the mid-pipe and rear section tends to be louder because it is the part that most significantly affects the exhaust sound. Modifying the mid-pipe and rear section exhaust: Typically, an exhaust system has three mufflers, with two located in the mid-pipe and rear section. Aftermarket mid-pipe and rear section parts often optimize or remove one of the mufflers to enhance the exhaust sound while improving exhaust efficiency, thereby increasing power. Modifying the front section (header) exhaust: The front section is the starting point of the exhaust system, connected to the engine via exhaust manifolds. A four-cylinder engine has four exhaust manifolds, and the front section's role is to merge these four pipes into one. If you want to improve exhaust efficiency, the most effective method is to modify the front section. Modifying the full exhaust system: The full exhaust system includes the entire exhaust setup. Choosing a model with a louder exhaust sound will inevitably enhance the overall sound. Different exhaust designs and layouts within the full system will have varying impacts on efficiency, backpressure, and sound.
8
5
Share

What is the shelf life of fully synthetic engine oil after opening?

Fully synthetic engine oil generally has a shelf life of one year after opening. Seal immediately after opening: After completing maintenance at a 4S shop or repair shop, the oil bottle cap should be tightened immediately. Since the original tin foil seal has been damaged, the remaining cap gasket provides limited isolation. At this point, a clean plastic film can be used to cover the bottle mouth. Avoid direct sunlight: After sealing the oil bottle, it should be stored in a dry and cool place, ensuring it is not exposed to sunlight to prevent oxidation reactions in the oil. Add in small amounts: When adding stored engine oil to the engine, do not pour it all in at once; retain a portion. Generally, after long-term storage, there may be trace amounts of moisture at the bottom of the oil bottle, which can affect engine performance or even cause adverse effects if added to the engine.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.