At what speed can Audi's active braking system brake

1 Answers
SebastianDella
07/30/25 8:44am
Audi's active braking system activates at speeds above 30km/h. It uses radar waves to monitor blind spots that are difficult for drivers to observe, providing voice alerts to prompt drivers to pay attention to driving safety, or the vehicle can actively brake. This system is highly practical for urban congested roads and traffic light intersections. Vehicle safety systems are mainly divided into two types: active safety systems and passive safety systems. Here are the relevant introductions: 1. Active safety systems: These include electronic devices such as ABS and ESP. 2. Passive safety systems: These involve the vehicle's energy-absorbing structure, seat belts, airbags, etc.
Was this review help?
9
0
Share
More Forum Discussions

How Many Ferrari LaFerrari Were Limited?

Ferrari LaFerrari was limited to 209 units. Here is the related introduction of Ferrari LaFerrari: Power: This car is equipped with a 6.3-liter V12 naturally aspirated engine, with a maximum power of 588 kW, a maximum torque of 700 Nm, a maximum power speed of 9000 rpm, and a maximum torque speed of 6750 rpm. This is a high-speed engine. Appearance: The front of the Ferrari LaFerrari has a double-layer design, which is relatively sharp, with ventilation holes on the hood and a carbon fiber front lip at the bottom; the mirrors extend relatively far, and the support rods are very thin, with carbon fiber mirror covers. The car has a length, width, and height of 4702 mm, 1992 mm, and 1116 mm respectively. The chassis is a one-piece carbon fiber structure, using the same stamping technology as F1.
5
1
Share

What maintenance does a six-year-old car need?

A six-year-old car requires the following maintenance: 1. Replace the engine oil, oil filter, and clean the air filter; check whether the generator belt and wiper blades are damaged; 2. Check whether the levels of various fluids are normal; 3. Check whether the tire pressure is normal and whether the tires have uneven wear, bulges, or damage; 4. Inspect the car chassis, including the brake pads, brake discs, connecting rods, ball joints, and CV joints for any scratches; 5. Check whether all switches and lights in the car are working properly. Car maintenance precautions include: 1. Make an appointment in advance; 2. Record any faults or questions encountered while driving and inform the staff during the maintenance registration.
7
3
Share

What does integrated high/low beam headlight mean?

Integrated high/low beam headlight combines both high beam and low beam functions in a single bulb, which contains two filaments for instant switching. The functions of integrated high/low beam headlights are: 1. Bi-xenon projector - By controlling the shutter to block portions of the high and low beams, it enables simultaneous illumination of both beams; 2. Wider and longer lighting coverage - The projector lens makes the light beam more uniform and concentrated with stronger penetration, enhancing driving safety. Different automotive lighting usage scenarios: 1. Position lamps (also called width markers) should be turned on during rain or dim light conditions; 2. Low beams are used on roads with street lighting; 3. High beams are used on roads without street lighting; 4. Turn signals must be activated in advance when the vehicle needs to make a turn.
11
1
Share

What car has a diamond-shaped logo with letters in the middle?

A diamond-shaped logo with letters in the middle belongs to Borgward. Its models include: Borgward BX5, Borgward BX7, Borgward BX6, Borgward BX3, Borgward BXi7, etc. Taking the 2020 Borgward BX5 as an example, its body structure is a 5-door, 5-seat SUV. The body dimensions are: length 4490mm, width 1877mm, height 1675mm, wheelbase 2685mm, minimum ground clearance 186mm, and fuel tank capacity 60L. The 2020 Borgward BX5 is equipped with a 1.4L turbocharged engine, with a maximum horsepower of 150PS, maximum power of 110kW, maximum torque of 250Nm, and is paired with a 6-speed automatic transmission.
19
3
Share

What Causes Black Smoke When Starting a Diesel Engine?

Diesel engine emits black smoke when starting due to the following reasons: 1. Premature fuel injection timing; 2. Excessive wear of fuel injection pump plunger, tappet, or cam; 3. Loose fixing bolts of fuel injection pump drive coupling; 4. Loose adjustment screws of plunger tappet in fuel injection pump; 5. Improper governor adjustment; 6. Sticking fuel injector needle valve that fails to close or leakage between needle valve and seat; 7. Loose pressure spring adjustment screw of fuel injector, resulting in too low injection pressure; 8. Blocked air filter or intake passage; 9. Too low cylinder compression pressure, leading to poor atomization; 10. Exhaust brake valve not fully opened; 11. Inferior diesel quality or incorrect grade.
18
3
Share

What brand is DS?

DS is a French car brand under the Peugeot Citroën group. DS models include: DS5LS, DS4S, DS6, DS7, DS9, etc. Taking the 2018 DS5LS as an example, its body structure is a 4-door 5-seater sedan, with body dimensions of: length 4702mm, width 1840mm, height 1510mm, wheelbase of 2715mm, fuel tank capacity of 60L, luggage compartment capacity of 466L, and a curb weight of 1475kg. The 2018 DS5LS features a front MacPherson strut independent suspension and a rear torsion beam non-independent suspension. It is equipped with a 1.6L turbocharged engine, paired with a 6-speed automatic transmission.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.