At how many kilometers is the second car maintenance?

How to set the horn for the Lavida's lock car function?

The method to set the horn for the Lavida's lock car function is: 1. Press the brake pedal, shift the gear lever to P, release the brake pedal, and press the one-touch start button twice consecutively; 2. Hold down the lock button on the driver's door for more than 10 seconds to complete the horn setting. Taking the Lavida 2021 1.5L Manual Fashion Edition as an example, it is a compact 4-door 5-seater sedan under SAIC Volkswagen, with a length, width, and height of 4670mm, 1806mm, and 1474mm respectively, a wheelbase of 2688mm, equipped with a 5-speed manual transmission, a trunk volume of 510L, front suspension type of MacPherson independent suspension, and rear suspension type of torsion beam non-independent suspension.

5

4

Share

What does the C1322 fault code mean?

C1322 fault code specific information is as follows: 1. Carbon deposits: Carbon deposits can cause incomplete combustion of gasoline, leading to engine shaking. The impact of engine carbon deposits on a car is significant, reducing engine power, resulting in uneven power output and gradual attenuation. It also increases fuel consumption, adding to the economic burden. 2. Cold start difficulty: That is, difficulty in ignition, making it hard to start the car. Severe carbon deposits in the combustion chamber can even cause cylinder knocking, producing noise during low-speed acceleration, damaging the pistons and crankshaft, and leading to engine overheating, which severely affects car safety. Additionally, it causes excessive emissions, not only failing annual inspection tests but also directly worsening environmental pollution.

8

0

Share

What is the trunk capacity of the Atenza?

The trunk capacity of the Atenza is 483 liters. Taking the 2020 Atenza 2.0L Skyactiv-G Luxury Edition as an example, its body dimensions are 4870mm in length, 1840mm in width, and 1445mm in height, with a wheelbase of 2830mm. The body structure is a 4-door, 5-seater sedan with front-wheel drive. The Atenza is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 158 PS, a maximum power of 116 kW, and a maximum torque of 202 Nm. It is paired with a 6-speed automatic transmission. The front suspension type is MacPherson strut independent suspension, and the rear suspension type is multi-link independent suspension.

2

0

Share

Why is the BMW air intake positioned low?

This design enhances the vehicle's aesthetic appeal but increases the risk of water ingress. It results in poorer wading capability and a lower maximum wading height. Below are relevant details: 1. Maximum wading depth: The maximum wading depth refers to the distance between the tire contact point and the engine air intake, known as 'Wattiefe' in English. It indicates the deepest water level a vehicle can safely traverse under normal driving conditions, serving as a crucial metric for off-road capability evaluation. A greater maximum wading depth signifies stronger water-crossing performance. 2. Function of the air intake: Its primary role is to deliver clean, dry, sufficient, and stable air to the engine while preventing large particulate contaminants from entering the combustion chamber, thereby avoiding abnormal engine wear caused by airborne impurities.

20

3

Share

Does the latest Audi A6 consume engine oil?

Audi A6L equipped with the third-generation EA888 engine hardly consumes engine oil, while other A6 models may exhibit oil consumption issues after reaching certain mileage. In fact, oil consumption in German cars is relatively common because their engines operate at higher temperatures, leading to increased oil consumption. Here are some additional details: 1. All car engines have an oil pan: The oil pan is used to store engine oil. 2. During engine operation, temperatures are relatively high: At this time, some of the oil in the engine's oil pan will vaporize. These vapors enter the crankcase forced ventilation system. There is a component in this system called the oil-gas separator, which separates exhaust gases from the vapors produced by oil volatilization.

12

5

Share

What is the fuel tank capacity of the Leopaard CS10 in liters?

The fuel tank capacity of the Leopaard CS10 is 60 liters. This data is officially released, and owners who have purchased the Leopaard CS10 can also check it on the vehicle's configuration sheet. The fuel grade for the Leopaard CS10 is 92, with a fuel consumption of 7.3-9.2L per 100 kilometers. A full tank can cover a distance of 652-821km. During daily driving, it is necessary to always pay attention to the remaining fuel in the tank. Generally, this is observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are about 2 segments left to avoid running out of fuel midway. In actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the manufacturer is from the bottom of the tank to the safe limit, and there is still some space from the safe limit to the tank opening. This space is reserved to allow for fuel expansion due to temperature increases without causing overflow. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.

17

4

Share

At how many kilometers is the second car maintenance?

How to set the horn for the Lavida's lock car function?

What does the C1322 fault code mean?

What is the trunk capacity of the Atenza?

Why is the BMW air intake positioned low?

Does the latest Audi A6 consume engine oil?

What is the fuel tank capacity of the Leopaard CS10 in liters?

How to Reset the Electronic Parking Brake Fault in Haval?

How to activate the horn sound when locking the Focus?

What Causes the Ticking Sound in BMW 320li Engine?

Where is the cigarette lighter fuse in the Audi Q5?