Are there any particularly bright halogen bulbs?

Can I Unplug the ETC When Lending My Car to Others?

You can unplug the ETC card when it's not in use, but be careful not to remove the card during operation, as this may cause the ETC to malfunction. The ETC installation process is as follows: Upon receiving the device, first check if the ETC card and the electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU, and a red light will briefly illuminate. The OLED screen will display messages such as "Tag Invalid" or "Please Insert Card," indicating the device is functioning properly. Clean the front windshield to ensure the surface is smooth, clean, and dry. Then, peel off the protective film on the back of the OBU and stick it to the installation location. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front side facing the driver and the back side facing the windshield, ensuring the chip is properly inserted into the OBU device. Where can ETC be installed: For small vehicles like cars and minivans, the OBU device should be installed in the upper middle part of the front windshield. For large vehicles like trucks and buses, it should be installed in the lower middle part. ETC installation requirements: The height should be no less than 1.2 meters and no more than 2.5 meters; the installation angle N should be between 30º and 90º (the angle between the surface of the electronic tag and the horizontal plane).

8

0

Share

What Causes Low Pressure or Inability to Spray Windshield Washer Fluid?

The reasons for low pressure or inability to spray windshield washer fluid are as follows: Low fluid level: Generally, if the windshield washer fluid cannot be sprayed, it is likely due to the fluid level being too low. Even if there is still some fluid in the reservoir, it may not reach the required height to be sprayed. Try refilling the washer fluid. Clogged nozzle: If the fluid still doesn’t spray after refilling, the nozzle might be blocked by dust. Use a fine needle to gently clean the nozzle. Frozen lines: Considering it is winter, the reservoir or lines might be frozen. After warming up the car, try parking it in the sun. If the fluid sprays afterward, it indicates the need to switch to a higher-grade antifreeze washer fluid. Blown fuse: If there is no sound from the motor when trying to spray the fluid, and the windshield wipers also don’t work, it could be due to a blown fuse or a damaged motor.

5

3

Share

Is Broken Glass Harmful to Car Tires?

It is very harmful. When a vehicle is in motion and the tires run over broken glass on the road, there is a high probability that the tires may get punctured. Once punctured, the tire pressure will become insufficient. If the vehicle is traveling at high speed, this can lead to dangerous situations, such as tire blowouts and loss of control of the vehicle. Below is relevant information: Definition: The tires of a motor vehicle are one of the important components of the vehicle, directly in contact with the road surface. Together with the vehicle's suspension, they help mitigate the shocks received during driving. The quality of the tires directly affects the vehicle's driving stability. Tire Maintenance: Regularly inspect the wear and condition of the vehicle's tires. If the wear is too severe, they should be replaced promptly.

12

0

Share

What does it mean when parking assist is turned off?

Parking assist system being turned off means it is temporarily unavailable and needs to be activated for use. Below are relevant explanations: Function: The parking assist system helps drivers easily park in crowded parking spaces, avoiding scratches and collisions. The reverse radar can inform the driver about surrounding obstacles through sounds or more intuitive displays, eliminating the trouble caused by the driver looking around while reversing, and helping the driver overcome blind spots and unclear vision, thereby improving reversing safety. Drawbacks: Automatic parking also has its drawbacks, such as high requirements for parking spaces. For example, it usually requires the width of a vertical parking space to be about 1 meter wider than the car, meaning there should be at least half a meter of space on each side of the car, which might be challenging for beginners to reverse into such a wide space.

14

4

Share

Is the window film applied to the outside or inside of the glass?

Car window film is applied to the inside of the glass to avoid damage from external environmental factors. Below is a relevant introduction: Function: An important function of car window film is explosion-proof. When the glass spontaneously breaks or shatters due to external impact, the film can hold the glass fragments together, preventing secondary injuries to passengers and enhancing safety. If applied to the outside of the glass, the film and wipers may scrape against each other during use, and rain or windblown sand can continuously erode the film, affecting its effectiveness. Maintenance after applying car window film: Avoid washing the car for the first three days after application to prevent the film from peeling off due to moisture. Also, try not to use the rear window defroster for a week, as moisture can negatively affect the defroster lines. After installation, you can clean the film surface with a damp towel, sponge, or soft cloth.

4

2

Share

Do I need to go to the DMV in person to replace my license plate?

You can either go in person or have someone else handle it on your behalf. If you choose to have someone else handle it, the vehicle owner must issue a "Power of Attorney" with both parties' signatures, and provide the original and a copy of the trustee's ID card. Additionally, before replacing the license plate, all traffic violation records for the vehicle must be cleared. Below is the relevant information: Required documents: "Application for Replacement of Motor Vehicle License Plate"; proof of identity for the vehicle owner and the agent (plus a power of attorney); vehicle registration certificate, vehicle license; a theft report issued by the local police station. Processing time: Replacement of motor vehicle license plates will be completed within 15 working days from the date of acceptance.

16

4

Share

Are there any particularly bright halogen bulbs?

Can I Unplug the ETC When Lending My Car to Others?

What Causes Low Pressure or Inability to Spray Windshield Washer Fluid?

Is Broken Glass Harmful to Car Tires?

What does it mean when parking assist is turned off?

Is the window film applied to the outside or inside of the glass?

Do I need to go to the DMV in person to replace my license plate?

Can a Cracked Windshield from a Stone Impact Be Repaired?

Can Windshield Washer Fluid Be Stored in the Trunk During Summer?

Is It Worth Repairing Small Dents Caused by Hail?

What is the maximum speed limit on icy and snowy roads?