Are the toll fees the same for 7-seater and 5-seater vehicles?

1 Answers
VonHaley
07/29/25 9:06pm
Automobile toll fees are the same for 7-seater and 5-seater vehicles, as both models are classified under the same vehicle category. According to the 'Toll Road Vehicle Classification Standards', vehicles are uniformly divided into five categories: 1. Category 1: Sedans and small passenger vehicles with 7 seats or fewer, and small trucks with a load capacity of 2 tons or less; 2. Category 2: Passenger vehicles with 8 to 19 seats, and trucks with a load capacity of more than 2 tons up to 5 tons (inclusive); 3. Category 3: Passenger vehicles with 20 to 39 seats, trucks with a load capacity of more than 5 tons up to 10 tons (inclusive), and 20-foot container trucks; 4. Category 4: Passenger vehicles with 40 seats or more, trucks with a load capacity of more than 10 tons up to 15 tons (inclusive), and 40-foot container trucks; 5. Category 5: Trucks with a load capacity of more than 15 tons.
Was this review help?
14
1
Share
More Forum Discussions

Where is the Reverse Gear Position in a Manual Transmission?

Manual transmission reverse gear positions vary by specific vehicle model: 1. For most standard vehicles, the manual transmission reverse gear is located at the bottom right corner; 2. In Santana and Buick models, the manual transmission reverse gear is positioned at the bottom left corner. Manual transmission vehicles utilize a manual gear-shifting mechanical transmission system to regulate speed, where the driver manually moves the gear lever to alter gear engagement positions within the transmission, thereby changing gear ratios to achieve speed variation. Manual transmission gears are categorized as follows: 1. First gear is the starting gear, used when initiating vehicle movement; 2. Second gear serves as the passing gear; 3. Third gear functions as the transition gear; 4. Fourth gear operates as the cruising gear; 5. Fifth gear is designated as the high-speed gear.
14
3
Share

Does a cracked tire need to be replaced?

Tires with cracks need to be replaced. Below are the criteria for determining when a tire should be replaced: 1. Small-scale cracking: It is generally acceptable to continue using the tire. However, if the cracking is extensive and covers almost the entire tread, replacement is necessary. Not only does this affect the comfort level of the tire (noise reduction), but it also significantly reduces the tire's grip performance, posing a certain danger while driving. 2. Tire wear level: Almost every tire has a wear indicator. For passenger car tires, the wear indicator height is typically 1.6 millimeters (this is also the legal minimum tread groove depth), while for load-bearing tires, it is 2.4 millimeters. If the wear indicator is flush with the tread, it means the tire is nearly worn out and should be replaced promptly.
14
1
Share

Why does the 10th-generation Accord require maintenance every 5,000 km?

This is a maintenance requirement set by the manufacturer for motor vehicles. Below is an introduction to the 10th-generation Accord: 1. Exterior: The Accord is a mid-size sedan with a body length of 4,893 mm, width of 1,862 mm, height of 1,449 mm, and a wheelbase of 2,830 mm. 2. Powertrain: The vehicle is equipped with a 1.5T turbocharged engine and a 2.0L naturally aspirated engine, paired with a continuously variable transmission (CVT). 3. Interior features: Includes Electronic Stability Program (ESP), hazard warning lights (commonly known as hazard lights), parking radar/camera, auto hold, auto start-stop, interior/exterior air circulation, and dual-zone climate control.
12
4
Share

What Causes Gear Grinding in Cars?

Gear grinding in cars occurs when the clutch fails to fully disengage. The clutch is located within the flywheel housing between the engine and the transmission. It consists of a drive belt, pressure plate, flywheel, crankshaft, driven disc, front support ring, rear support ring, release hook, release bearing, transmission input shaft, clutch cover, and diaphragm spring. The functions of the clutch include: 1. Ensuring smooth vehicle startup; 2. Facilitating gear shifts to adapt to varying driving conditions; 3. Preventing overload in the transmission system; 4. Reducing torsional vibration impact. Clutches are categorized into flat friction type and automatic centrifugal type. The flat friction clutch is reliable and has a long service life, while the automatic centrifugal clutch features a simple structure, reliable operation, and easy handling.
7
3
Share

How to adjust the headlight height of Audi A6?

Audi A6 headlight height adjustment methods are: 1. Find the vehicle information in the central control screen, select the lighting settings option, and there will be numbers 1 to 6 after opening, the higher the number, the lower the height; 2. Open the engine hood, find the white plastic knob near the headlight, and use a hex wrench to adjust the headlight height. The Audi A6 is a compact car with body dimensions of: length 5012mm, width 1855mm, height 1485mm, wheelbase 2922mm, minimum ground clearance 116mm, body weight 1800kg, and fuel tank capacity 80L. The Audi A6 is equipped with a 2.0T inline 4-cylinder turbocharged engine, with a maximum horsepower of 190PS, maximum torque of 220Nm, maximum power of 140kW, and is paired with an 8-speed automatic transmission.
4
3
Share

Buick Excelle Maintenance Schedule?

Buick Excelle minor maintenance is recommended every 5,000 kilometers or 6 months of vehicle use, while major maintenance should be performed every 10,000 kilometers or 1 year of vehicle use. Below is relevant information about vehicle maintenance: 1. Vehicle maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain components of a vehicle, also known as vehicle servicing. 2. Vehicle maintenance primarily includes servicing the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, and other components. 3. The purpose of vehicle maintenance is to maintain a clean appearance, ensure normal technical conditions, eliminate potential hazards, prevent faults, slow down deterioration processes, and extend the service life. Routine maintenance includes replacing engine oil and oil filter, replacing the three filters (air, cabin air, and fuel filters), as well as checking and replenishing brake fluid, coolant, and power steering fluid.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.