Are the Photos Taken on Highway Ramps for Speed Measurement?

What are the symptoms of a dirty car throttle?

Engine throttle dirty performance symptoms include: 1. When accelerating, you may feel the throttle sticking, becoming heavy, slow car acceleration, slow RPM rise when pressing the throttle at idle, delayed response, and immediate speed drop when releasing the throttle while driving. 2. A dirty throttle affects the precision and smoothness of engine intake, with the most obvious issue being potential idle shaking or even stalling, as well as unsteady acceleration when pressing the throttle. Content expansion: 1. Mainly due to driving environment, poor air filter filtration, and high dust levels in the surrounding area can cause the throttle to become dirty. 2. Poor quality engine oil with high evaporation rates can lead to throttle contamination. 3. The generation of oil vapor and impurities in the crankcase can cause the throttle to become dirty. 4. After turning off the engine, the throttle cannot be completely sealed, allowing dust to accumulate over time and leading to throttle contamination.

15

2

Share

How often should automotive urea fluid be refilled?

Automotive urea should be refilled approximately every 2000 kilometers, with 3 to 5 liters of urea used per 100 liters of diesel fuel. The consumption of urea is equivalent to 3% to 5% of the fuel consumption. Automotive urea is a liquid used in SCR (Selective Catalytic Reduction) technology to reduce nitrogen oxide pollution in diesel vehicle exhaust. It is composed of 32.5% high-purity urea and 67.5% deionized water. The reason for adding automotive urea is primarily to purify exhaust emissions. The harmful substances in diesel vehicle exhaust are mainly nitrogen oxides and particulate matter. While particulate emissions can be reduced through technical means within the engine, the exhaust primarily contains nitrogen oxides. By injecting urea into the exhaust after-treatment device, the urea decomposes into ammonia at high temperatures. Under the action of a catalyst, the ammonia reacts with nitrogen oxides to produce harmless nitrogen gas and water.

19

1

Share

How to Turn Off the Maintenance Reminder on Volkswagen?

Volkswagen maintenance reminder can be turned off by following these steps: 1. Turn off the ignition switch, press the clock adjustment button SET while turning on the ignition switch; 2. Release the SET button, then press the SET button once more, and turn off the ignition switch; 3. Turn on the ignition switch again to check if it has been reset. If not, you must start over from the beginning. Here is a brief introduction to the Volkswagen Lavida: its body dimensions are 4605mm, 1765mm, and 1460mm respectively, with a wheelbase of 2610mm. The design of the Lavida's dashboard has been slightly modified from the traditional Volkswagen style, eliminating the two small circular dials found on the Sagitar and instead using an onboard computer to provide relevant driving information. Additionally, the outer ring of the onboard computer is decorated with a circular chrome line, integrating it with the chrome-plated speedometer and tachometer.

19

3

Share

How to Operate When Starting the Volkswagen Tiguan?

The correct steps to start the Volkswagen Tiguan are as follows: 1. First, press the start button once. After the ACC light turns on, press the start button again. 2. At this point, the one-touch start button will turn green, and the vehicle will begin self-checking. 3. Once the vehicle completes the self-check, press the brake and press the one-touch start button once more to start the vehicle. The correct gear shifting sequence when turning off the Volkswagen Tiguan: 1. ① Stop the vehicle → ② Press the brake → ③ Shift to N gear → ④ Release the brake → ⑤ Engage the handbrake → ⑥ Turn off the engine → ⑦ Shift to P gear (Note: When parking on a slope, steps ④ and ⑤ should be reversed; it is also acceptable to turn off the engine after shifting to P gear). 2. If you shift to P gear before engaging the handbrake, the vehicle may move slightly if not on level ground. This can cause the locked mechanical components of the transmission to jam more tightly, subjecting the metal parts to greater impact forces.

17

1

Share

What is the difference between a manual and automatic driver's license?

The differences between a manual transmission driver's license and an automatic transmission driver's license are as follows: 1. The permitted vehicle types are indicated differently. The permitted vehicle type for a manual transmission license is "small cars", while for an automatic transmission license it is "small automatic transmission cars". 2. The codes representing the permitted vehicle types are different. The code for manual transmission license is "C1", while for automatic transmission license it is "C2". 3. The permitted vehicles are different. Vehicles permitted for manual transmission license include "small and micro passenger vehicles, light and micro cargo vehicles; light and micro special operation vehicles." Whereas, the permitted vehicles for automatic transmission license are "small and micro automatic transmission passenger vehicles and light and micro automatic transmission cargo vehicles." 4. The other permitted vehicle types differ. Other vehicle types that a manual transmission license holder can drive include "small automatic transmission cars (code C2), low-speed cargo vehicles (code C3), three-wheeled cars (code C4)."

19

5

Share

How often should the Cadillac XT5 fuel filter be replaced?

Cadillac XT5 fuel filter should be replaced every 10,000 kilometers. If you usually use high-quality fuel, it can be replaced every 30,000 kilometers. The fuel filter, fully known as gasoline filter, is a type of fuel filter that removes impurities from fuel, providing clean fuel to the engine and protecting the engine and fuel supply system. It is an important automotive component. Below is relevant information about the fuel filter: 1. Automotive fuel filters are generally divided into two types: inline fuel filters and built-in fuel filters. The most common is the inline fuel filter, which is located outside the fuel tank and connected to the fuel inlet pipe. The main function of the fuel inlet pipe is to deliver fuel to the engine. 2. The biggest advantage of inline fuel filters is that they are easy to replace. Built-in fuel filters, on the other hand, are located inside the fuel tank, making them difficult to replace and more costly to maintain. However, they have a very high fuel flow rate and are less prone to clogging. The downside is that replacing them is very troublesome, requiring the fuel tank to be opened, and non-professional personnel can easily damage the car during the process.

11

2

Share

Are the Photos Taken on Highway Ramps for Speed Measurement?

What are the symptoms of a dirty car throttle?

How often should automotive urea fluid be refilled?

How to Turn Off the Maintenance Reminder on Volkswagen?

How to Operate When Starting the Volkswagen Tiguan?

What is the difference between a manual and automatic driver's license?

How often should the Cadillac XT5 fuel filter be replaced?

Why does the car fail to start when hot but starts immediately when cold?

What is the warranty claim process for vehicles during the warranty period?

How to Test if a Car Coolant Temperature Sensor is Good or Bad?

Does Not Replacing Spark Plugs Affect Fuel Consumption?