Are Oil Additives Effective for Burning Oil?

Is It Normal for the Engine Fault Light to Illuminate in a New Car?

Specific reasons are as follows. Below is relevant information: Starting ignition: A starting system malfunction prevents the engine from turning or causes it to turn too slowly. Ignition system failure, possibly due to incorrect ignition timing. Engine: Poor engine idling or stalling, with the main cause being a malfunction in the idle control system. Poor engine combustion state is the primary reason for the engine fault light illuminating. An engine is a machine capable of converting other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, etc.

16

1

Share

Please Repair Power Steering, Drive Carefully - What Are the Reasons?

Reasons for the prompt 'Please repair power steering, drive carefully': lack of power steering fluid, issues with the power steering sensor, or problems with the power steering assist device. Below are the details: Lack of Power Steering Fluid: Symptoms of low fluid: oil level too low, causing abnormal noises when turning the steering wheel; poor lubrication when the car is cold, leading to internal wear and abnormal noises; difficulty steering or even inability to steer. Solution: the steering fluid needs to be replaced, and the oil level should be within the specified range. If the fluid is insufficient, after checking for no leaks in all parts, the power steering fluid should be replenished with the specified brand. Issues with the Power Steering Sensor: If the power steering sensor fails, it will not detect signals, and the most obvious symptom is that the steering wheel becomes very heavy when turning. Solution: it is necessary to visit a 4S shop or auto repair shop for inspection to determine whether the ABS wheel speed sensor wire needs to be replaced. Problems with the Power Steering Assist Device: Accompanied by the following symptoms: heavy steering, abnormal steering noises, steering wheel shaking, poor steering wheel return ability, etc. Solution: inspect the steering gear, steering pump control valve, oil cup filter, steering fluid, and clean the entire power steering system; check tire pressure and replenish if low; inspect all connecting parts of the oil pipes and tighten all connecting bolts; replace oil pipes, power steering pump, or power steering gear if necessary.

1

4

Share

What kind of gloves should be worn for Subject 2?

For Subject 2, disposable gloves can be worn, preferably gloves that fit the fingers well. Extended information is as follows: Objective: To master the basic driving operation essentials and possess the fundamental ability to control the vehicle; to proficiently grasp the basic methods of site and on-site road driving, and have the capability to reasonably use vehicle control components, correctly control the spatial position of the vehicle, and accurately control the vehicle's driving position, speed, and route. Subject 2 Exam: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment, referred to as the site driving skill test. The C1 car test items include five mandatory tests: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curve.

10

3

Share

Is an ID card required for the simulated driving test of Subject 2?

An ID card is not required for the simulated driving test of Subject 2. Here is the relevant information: ID card issue: If you do not have an ID card for the driving license Subject 2 test, you can obtain a temporary ID card from the local public security authority and use it for the driving test. Chinese citizens aged 16 or above residing within the territory of the People's Republic of China who have not yet received their resident ID card or whose original card is lost or damaged and has not been replaced can apply for a temporary ID card as needed. Notes: First, pay attention to some details, make sure to remember the entire test process and procedures, and operate according to regulations. Avoid making low-level mistakes such as forgetting to fasten the seat belt, forgetting to turn on the turn signal, or forgetting to turn off the turn signal.

18

3

Share

Is a car that has been in stock for over three months considered a stock car?

There is no clear definition of a stock car, and there are no relevant national regulations specifying the term 'stock car.' However, in the automotive sales industry, the term 'stock car' does exist, generally referring to vehicles that have been in stock for more than three months or even half a year. Imported cars, due to factors such as transportation cycles, are considered stock cars if they have been manufactured six months or more prior to the current date. Below is relevant information for your own judgment: In reality, after consumers place an order for their desired car, not all can be picked up within a short period. Most deliveries take a month or even longer, which means some new cars may become 'stock cars' in terms of definition by the time they are delivered. However, this is not a major concern, as being in stock for a slightly longer period does not necessarily imply any issues. To check the production date of a new car, you can simply refer to the vehicle's nameplate located on the passenger side or inside the engine compartment. Solution: If the car has been in stock for over a year, you can request the 4S store to replace the original engine oil. Additionally, check the production date of the tires, as new tires older than two years may face the risk of rubber aging, so you should also ask the 4S store to replace them. If these two aspects are fine, such a stock car will not affect its usability.

2

3

Share

How to reference points for roadside parking in rainy weather during Subject 3 test?

When receiving the instruction to pull over, immediately turn on the right turn signal and reduce speed (if the speed is too high, apply brakes and shift to a lower gear; if the speed is moderate, just use clutch and brake for control). Here are the relevant details: Observation: Simultaneously check the right side mirror and the right rear of the vehicle for any vehicles or pedestrians that need to be avoided. Once the right side and rear are clear, slightly steer right (while gently applying brakes and fully depressing the clutch), align the driver's position toward the center of the road, then make minor right adjustments until the front 1/3 of the vehicle overlaps with the right lane edge line. Straighten the vehicle body and gradually brake when approximately 30cm from the roadside or boundary line to bring the vehicle to a stop. Note: If there are intersections, bus stops, or no-parking signs ahead, you should proceed past these areas before stopping.

15

2

Share

Are Oil Additives Effective for Burning Oil?

Is It Normal for the Engine Fault Light to Illuminate in a New Car?

Please Repair Power Steering, Drive Carefully - What Are the Reasons?

What kind of gloves should be worn for Subject 2?

Is an ID card required for the simulated driving test of Subject 2?

Is a car that has been in stock for over three months considered a stock car?

How to reference points for roadside parking in rainy weather during Subject 3 test?

Reasons Why the Built-in 4G Network of Buick GL8 Cannot Connect to the Internet

What is the content of the Shanghai Subject 3 driving test?

What are the hand signals of traffic police?

Can You Drive Someone Else's Car on the Road?