Are 7-seater SUVs in 2021 eligible for the 6-year exemption from inspection?

What are the tips for A2 reverse parking?

A2 reverse parking tips are as follows: 1. Fasten the seatbelt, shift to reverse gear, turn on the left signal, press the clutch, release the handbrake, and slowly lift the clutch to start gently. 2. Watch the right line and adjust the car body accordingly, align the left mirror vertical seam with the right line. Stop when the front horizontal line reaches shoulder level, shift to reverse gear and release the clutch. When the left mirror covers the horizontal line corner, turn the steering wheel fully to the right. 3. Watch the left mirror and wait for the parking line, turn back one circle when the angle is 30 degrees. When the car is parallel to the line, straighten the steering wheel for two full turns. When the left mirror covers the front corner of the parking space, press the clutch and brake. Shift to first gear to exit, turn the steering wheel fully to the left when the car head touches the line. Stop when the car head covers the line, keep the steering wheel position and reverse. 4. Watch the right mirror and wait for the parking line, turn back slightly when the angle is 30 degrees. When the car is parallel to the line, straighten the steering wheel for two full turns. When the left mirror covers the front corner of the parking space, press the clutch and brake. Shift to first gear to exit, turn the steering wheel fully to the right when the car head touches the line.

4

1

Share

Where is the front steering angle sensor located on the BMW X3?

The front steering angle sensor on the BMW X3 is located at the very bottom of the steering column. You need to remove the steering wheel first, then take off the clock spring to access the steering angle sensor. After replacement, it's essential to promptly perform sensor matching and programming. Below is an introduction to the automotive steering angle sensor: 1. The automotive steering angle sensor is primarily used to detect the rotation angle and direction of the steering wheel. Whether the steering wheel turns left or right, the steering angle sensor will detect it, enabling the vehicle's electronic control unit to issue the correct steering commands. The rotation angle of the steering wheel provides the basis for the vehicle's steering amplitude, allowing the car to follow the driver's steering intentions. 2. The steering angle sensor consists of photoelectric coupling elements and a perforated slot plate, among other components. The photoelectric coupling elements include a light-emitting diode and a phototransistor. The perforated slot plate is positioned between the light-emitting diode and the phototransistor. The perforated slot plate has many small holes. When the steering wheel turns, the perforated slot plate rotates accordingly. The phototransistor operates based on the light passing through the perforated slot plate and outputs digital pulse signals. The vehicle's electronic control unit uses these signals to identify the steering wheel's rotation angle, direction, and speed.

6

4

Share

What is the reason for the bulb showing a fault when it is not broken?

The reasons why the bulb shows a fault when it is not broken are: 1. There is a loose connection in the circuit; 2. The monitoring system is faulty. The solutions for the bulb showing a fault when it is not broken are: 1. Restart the car computer; 2. Reconnect the loose circuit. Steps to replace the bulb: 1. Unplug the power socket of the bulb; 2. After unplugging the power socket, remove the waterproof cover behind the bulb; 3. Take out the bulb from the reflector and replace it. The correct way to use car lights is: 1. Turn the left light control switch forward one notch for the small light; 2. Turn it forward two notches for the low beam; 3. Push the light control lever forward once for the high beam; 4. Lift the light control lever forward once for the right turn signal. Precautions for using car lights are: 1. Turn on the low beam when driving at night; 2. Do not use the high beam when the rear car is driving close to the front car in the same direction; 3. When passing sharp turns, slopes, arch bridges, crosswalks, or intersections without traffic lights at night, alternate between high and low beams to signal.

10

2

Share

How to Remove Sand from Window Gaps?

Methods to remove sand from window gaps: 1. Use a hair dryer to blow it out; 2. Adjust the water gun to the appropriate setting, avoiding excessive pressure. The benefits of car maintenance include: 1. Ensuring the vehicle operates at optimal performance; 2. Improving vehicle efficiency and reducing wear on parts and tires; 3. Enhancing driving safety; 4. Preventing potential hazards caused by vehicle issues; 5. Reducing noise and environmental pollution; 6. Keeping the vehicle's appearance clean and preventing damage. Car maintenance tasks include: 1. Replacing engine oil, oil filter, air filter, and fuel filter; 2. Inspecting the body and tires; 3. Checking the braking system; 4. Examining the chassis for damage. Car maintenance precautions: 1. Schedule appointments in advance; 2. Record any faults or questions encountered while driving and inform the staff during maintenance registration.

5

4

Share

Can China V Vehicles Still Be Purchased Now?

China V vehicles can still be purchased now. Below is relevant information about China's automotive emission standards: 1. Background: The Chinese government places great emphasis on addressing urban environmental pollution caused by vehicle exhaust emissions. National environmental protection agencies and automotive manufacturers are accelerating efforts to meet China III and China VI standards. Controlling vehicle exhaust emissions has become an urgent and pressing responsibility for environmental departments, automakers, and all sectors of society. 2. Phases: Phase one, starting from July 1, 2020, all vehicles sold and registered must comply with the China VI A standard; Phase two, starting from July 1, 2023, all vehicles sold and registered must comply with the China VI B standard.

15

2

Share

What kind of transmission does the Camry have?

The Camry is equipped with a CVT (Continuously Variable Transmission). The functions of the transmission are: 1. To change the transmission ratio to meet the traction needs under different driving conditions; 2. To enable reverse driving; 3. To interrupt power transmission to the drive wheels when the engine starts, idles, shifts gears, or requires power output while parked. Taking the 2021 Camry as an example, it is a mid-size sedan with the following dimensions: length 4885mm, width 1840mm, height 1455mm, wheelbase 2825mm, fuel tank capacity 60 liters, and curb weight 1530kg. The 2021 Camry features a MacPherson strut front suspension and an E-type multi-link rear suspension. It is powered by a 2.0L naturally aspirated engine with a maximum horsepower of 178PS, maximum power of 131kW, and maximum torque of 210Nm.

6

5

Share

Are 7-seater SUVs in 2021 eligible for the 6-year exemption from inspection?

What are the tips for A2 reverse parking?

Where is the front steering angle sensor located on the BMW X3?

What is the reason for the bulb showing a fault when it is not broken?

How to Remove Sand from Window Gaps?

Can China V Vehicles Still Be Purchased Now?

What kind of transmission does the Camry have?

What is the reason for loose steering gear and abnormal noise when driving on rough roads?

Introduction to the Functions of the Changan Uni-T Key

How Many Cylinders Does the Baojun 510 Have?

Should Jetta Use 92 or 95 Octane Gasoline?