···
Log in / Register

where to find the mint mark on a 1921 silver dollar

1Answers
DelTalia
12/01/2025, 02:35:20 AM

The provided context offers limited direct information, pointing only to the existence of a 1921 Morgan Dollar from the Philadelphia mint. A complete numismatic explanation requires supplementing this information.

To locate the mint mark on a 1921 silver dollar, you must first identify which of the two designs was produced that year: the Morgan Dollar or the Peace Dollar. The location is specific to the design and is always found on the reverse (tail) side of the coin.

For the 1921 Morgan Silver Dollar, the mint mark is situated below the eagle's tail feathers, centered just above the letters "D" and "O" in the word "DOLLAR." In 1921, these coins were produced at three U.S. Mint facilities. A small "S" indicates the coin was struck in San Francisco, while a "D" indicates it was struck in Denver. If there is no mint mark present in this location, the coin was produced at the Philadelphia Mint, which was the standard practice for that facility's coinage at the time.

For the less common 1921 Peace Dollar, the mint mark is also on the reverse side. It can be found on the lower part of the coin, to the left of the eagle, just above the edge of its tail feathers. As with the Morgan Dollar, an "S" or "D" will be present for the San Francisco or Denver mints, respectively, while a coin from the Philadelphia mint will have no mint mark.

Was this review help?
120
Share
More Q&A

How do I change the hanging height of the Kichler 82404 Edinborough 5-Light Linear Chandelier?

To customize the hanging height of your Kichler 82404 Edinborough 5-Light Linear Chandelier, you'll utilize the provided threaded pipes. These come in 6-inch and 12-inch lengths, allowing you to fine-tune the fixture's position. Here's how: First, thread either a 6-inch or 12-inch pipe onto the fixture's threaded end on one side of the chandelier. Then, attach another pipe (6-inch or 12-inch) to the first. Repeat this process, matching the pipe configuration on the opposite side of the chandelier to maintain balance. Next, secure the stem loops into the ends of the connected threaded pipes. Finally, connect the canopy loops to the stem loops using the provided open chain links. Ensure all chain links are securely closed to prevent any potential issues. By adjusting the number and combination of threaded pipes on each side, you can achieve the perfect hanging height for your space, ensuring your Edinborough chandelier looks its best.
101
Share

How do I install ARMORLITE Jeep Wrangler JK 4-Door Wheelhouse Covers correctly?

Installing ARMORLITE Jeep Wrangler JK 4-Door Wheelhouse Covers involves a few key steps to ensure a perfect fit and finish. First, prepare your vehicle: make sure it's in park with the emergency brake engaged. Wear gloves to protect your hands. Remove any existing factory carpet wheelhouse covers, then thoroughly clean the sheet metal surface with water and mild dish soap to remove any dirt or debris. Next, begin the installation. Start with the tail section of the cover, tucking the top edge under the sheet metal trim and the bottom edge under the plastic trim. Position yourself in the rear cargo area to ensure proper alignment. Then, install the main section of the cover over the wheelhouse, making sure the bottom section sits correctly under the seat. Align the hole between the main and tail pieces and secure them using the provided snap-fit connector plug. Tuck the top and bottom edges of the main section under the sheet metal and plastic trim. Ensure the side of the ridge touches the plastic trim to prevent any popping. Repeat these steps on the opposite side to install the other wheelhouse cover. For optimal results, consider these alignment tips. If you have an ARMORLITE cargo mat, make sure the wheelhouse covers tuck under it for superior water management. If you don't have the cargo mat, ensure the finished edge of the wheelhouse covers follows the contour of your vehicle's wheelhouse and lies flat against the cargo floor. For visual guidance, you can also check out the detailed instructional video at www.GoArmorlite.com/installation.
119
Share

How do I prepare my MODULARO wc192070 Wooden Shed for assembly and maximize its lifespan?

To ensure your MODULARO wc192070 Wooden Shed stands the test of time, proper preparation and maintenance are key. Here's how to get started: Before Assembly: Store the shed package in a dry location, shielded from the elements. Choose a spot sheltered from severe weather. Elevate the shed to prevent direct ground contact. Avoid storing the package in a heated room. Warranty and Documentation: Keep all documentation that came with your shed. For any warranty claims, provide the control sheet and purchase invoice to the seller. The warranty covers specific aspects; details are in the manual. Maintenance and Painting: Immediately after assembly, apply a wood preservative to all wooden components. Before assembly, treat the floorboards with a wood impregnation agent. Inside and outside, apply a wood impregnation agent to doors and windows. After assembly, protect the wood from moisture and UV rays with a weather-resistant paint. Conduct a thorough inspection of the shed every six months. Tools You'll Need: Assembly aid Water level Knife Ladder Screwdriver Measuring tape Hammer Saw Pliers Drill Protective gloves for safety By following these steps and using the right tools, you can ensure your MODULARO wc192070 Wooden Shed is properly assembled, well-maintained, and built to last, as recommended by the manufacturer.
101
Share

How do I charge my Einhell GC-CG 3,6 Li cordless grass and shrub shears?

To charge the battery pack of your Einhell GC-CG 3,6 Li cordless grass and shrub shears, follow these steps: First, connect the charger to the charging station. Ensure your mains voltage matches the voltage specified on the battery charger's rating plate. Next, plug the charger into a power outlet. The red LED indicator will illuminate, signaling that power is available. The battery pack will then begin charging. A completely discharged battery pack typically requires a charging time of 3 to 5 hours. It's normal for the battery pack to warm up slightly during charging. Once fully charged, the red LED will turn off. For optimal battery life, recharge the battery pack promptly when you notice a decrease in the tool's performance. Avoid completely discharging the battery, as this can lead to damage. For detailed information and safety advice on charging, consult the "Charging the battery pack" section in your Einhell GC-CG 3,6 Li cordless grass and shrub shears instruction manual.
107
Share

Can I replace the light source in my Villeroy & Boch Avento lamp?

Unfortunately, the light source in the Villeroy & Boch Avento lamp is not designed to be replaceable. Should the light source fail or reach the end of its lifespan, the entire lamp unit will need to be replaced. This information is based on the official Villeroy & Boch Avento lamp instruction manual. Always prioritize safety and adhere to the manufacturer's guidelines to ensure the lamp functions correctly.
115
Share

How do I correctly connect the JBC PHXLE XL Preheater to a power source?

To connect your JBC PHXLE XL Preheater to a power supply, begin by consulting the JBC PHXLE XL Preheater's user manual for the most accurate and up-to-date instructions. Typically, you will need to identify the correct power cable specifications, including the gauge (size) of the wire recommended by JBC to handle the preheater's power requirements. Ensure that the power supply you are using meets these specifications. Carefully connect the power cable to the preheater, paying close attention to the connection points and following any polarity markings indicated. Double-check all connections to ensure they are secure and properly seated. Before turning on the JBC PHXLE XL Preheater, visually inspect the cable and connections for any signs of damage. If everything appears correct, you can then safely power on the unit. For your safety and to avoid any damage to the equipment, always adhere to the manufacturer's guidelines outlined in the JBC PHXLE XL Preheater documentation.
116
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.