what to ask when buying a second hand car

how much is a 1922 us silver dollar worth

Hey there, that's a great question! The value of a 1922 U.S. Peace Silver Dollar can vary quite a bit, so there isn't one single price for it. The final worth really depends on two main things: the coin's condition, also known as its grade, and where it was minted. For 1922, these silver dollars were made at three different mints: Philadelphia (which has no mint mark), Denver (look for a "D"), and San Francisco (look for an "S"). The 1922 dollar from the Philadelphia mint is the most common one. If you have one of these in circulated, or well-used, condition, its value is often tied to the value of the silver inside it, which is typically around $17 to $18. However, the value can climb significantly from there. If the coin is in better, uncirculated condition, or if it's from the Denver (D) or San Francisco (S) mints, it will be worth more. For example, a 1922-S dollar in circulated condition might be worth about $30. Uncirculated coins from any mint can start around $30 and go up into the hundreds or even thousands of dollars for coins in pristine, top-grade condition. So, to get a precise value, you'll want to check for a mint mark on the back of the coin (below the word "ONE") and get a good idea of its overall condition.

4

1

Share

how much is a 1980 susan b anthony silver dollar worth

A common misconception regarding the 1980 Susan B. Anthony dollar is its composition. Despite the "silver dollar" moniker often used colloquially for dollar coins, the 1980 issue contains no silver. Its composition is a copper-nickel clad alloy, specifically a core of pure copper with outer layers made of 75% copper and 25% nickel. Consequently, its value is not derived from precious metal content but rather from its numismatic condition, mint mark, and any potential die varieties. The value of a 1980 Susan B. Anthony dollar is highly dependent on these factors. For coins that have been in circulation, their worth is typically just their face value of one dollar. However, uncirculated specimens that have been preserved in pristine condition command a premium. The coin was produced at three different mints, identifiable by a small mint mark on the obverse side, to the left of the bust: P (Philadelphia), D (Denver), and S (San Francisco). For uncirculated coins from the Philadelphia (P) and Denver (D) mints, values can range from approximately $2.50 to over $40, with the price increasing significantly for higher grades, such as Mint State 67. The San Francisco (S) mint produced coins for both general circulation and special proof sets for collectors. The circulation strikes from San Francisco are valued similarly to their P and D counterparts. The proof versions, which feature a sharper strike and a mirror-like finish, are generally valued between $5 and $35, depending on their grade. For instance, a proof coin graded PR 65 might be worth around $5, while a near-perfect PR 70 could fetch a higher price. Some minor varieties exist for the S mint mark, such as a "Filled S" or "Clear S," though these do not typically result in a dramatic difference in value for the 1980 issue.

20

5

Share

how much is a 1964 half dollar worth in silver weight

Hello there! That's a great question about a very popular coin. The 1964 Kennedy half dollar is special because it's composed of 90% silver. Based on the information provided, a 1964 half dollar contains 0.36169 troy ounces of pure silver. This gives it a silver melt value of approximately $9.08. It's important to keep in mind that this value is tied directly to the live market price of silver, which can change daily. So, while the amount of silver in the coin is constant, its cash value will fluctuate. This value represents what the silver itself is worth, not necessarily what a collector might pay for the coin, which can depend on its condition and rarity.

3

0

Share

how much is a half dollar from 1972 worth

Based on the provided information and general numismatic knowledge, the value of a 1972 Kennedy half dollar depends heavily on its condition, mint mark, and whether it has any rare errors. For most of these coins found in circulation, the value is simply their face value of 50 cents. These coins are made from a copper-nickel clad composition and contain no silver, so they do not have any intrinsic precious metal value. The U.S. Mint produced 1972 half dollars at two main facilities for general circulation: Philadelphia (which has no mint mark) and Denver (which has a "D" mint mark on the obverse). In typical circulated condition, both the 1972 and 1972-D half dollars are worth face value. However, coins in uncirculated, like-new condition are worth a premium to collectors, typically fetching a few dollars. The value can rise significantly for coins that are professionally graded and certified in the highest states of preservation. Additionally, certain rare die varieties can be worth much more. As hinted by collecting resources that discuss "cherry-picking," a notable error for this year is the 1972-D "No FG" variety. On this specific coin, the designer's initials, "FG" (for Frank Gasparro), are completely missing from the reverse side, just under the eagle's tail. This error is highly sought after by collectors and can be worth anywhere from $20 to over $500, depending on its specific condition and grade. Therefore, while most 1972 half dollars are common, it is worth checking the reverse side for this specific valuable error.

17

1

Share

how much is the silver worth in a silver half dollar

Discovering the true value of a silver half dollar is like uncovering a small piece of treasure, and the secret is all in the date. The amount of silver, and therefore its worth, changes dramatically depending on the year it was minted. You could be holding something worth much more than a mere fifty cents. For the most significant value, you'll want to look for half dollars minted in 1964 or earlier. These coins, which include the iconic Walking Liberty, Franklin, and the 1964 Kennedy half dollars, are the real prize for collectors and investors. They are composed of 90% silver, containing a substantial 0.3617 troy ounces of the precious metal. Based on current market prices, the silver in one of these coins is worth around $9.09, a remarkable return on its face value. The story of silver in half dollars doesn't end there, however. From 1965 to 1970, the U.S. Mint produced Kennedy half dollars with a reduced silver content. These coins are 40% silver, containing about 0.1479 troy ounces. While not as valuable as their predecessors, their silver content still gives them an intrinsic worth of approximately $3.72. Finding one of these is still a fantastic discovery, as they are worth many times their fifty-cent denomination. Any half dollar you find dated 1971 or later (excluding special silver proof sets) contains no silver at all and is only worth its face value. So, before you put a half dollar back into circulation, always check the date. You might just be holding onto a valuable piece of American history whose worth is tied directly to the fluctuating price of silver.

8

0

Share

how to melt silver

The provided source materials are insufficient for a comprehensive explanation of the silver melting process. The context consists of hyperlinks and boilerplate text from online platforms, which do not contain procedural information on the subject. Therefore, the following explanation is based on general metallurgical and lapidary knowledge. The process of melting silver requires achieving and maintaining a temperature above its melting point. For fine silver (.999 pure), this point is approximately 961.8°C (1763.2°F). Sterling silver (.925), an alloy containing copper, has a slightly lower and broader melting range, typically between 800-890°C (1475–1640°F). To achieve these temperatures, specialized equipment is necessary. A heat-resistant container, known as a crucible, is used to hold the silver. These are commonly made from materials like graphite or ceramic that can withstand the extreme thermal stress. The heat source must be capable of generating sufficient and consistent temperatures. For smaller quantities, a gas-powered torch, such as one using MAPP gas or an oxy-acetylene mixture, is often employed. For larger volumes or more controlled melts, an electric furnace is the preferred apparatus. During the melting process, a flux, commonly borax, is added to the silver. The flux serves a dual purpose: it helps prevent oxidation by creating a protective layer over the molten metal and assists in separating impurities, which can then be skimmed from the surface. Safety is of paramount importance in this process due to the high temperatures and potential for hazardous fumes. The procedure must be conducted in a well-ventilated area to avoid the inhalation of metal vapors. Appropriate personal protective equipment (PPE), including heat-resistant gloves, a leather apron, and full-face and eye protection, is essential to prevent severe burns. Once the silver is fully liquefied, it can be carefully poured into an ingot mold or used for casting purposes.

1

0

Share

what to ask when buying a second hand car

how much is a 1922 us silver dollar worth

how much is a 1980 susan b anthony silver dollar worth

how much is a 1964 half dollar worth in silver weight

how much is a half dollar from 1972 worth

how much is the silver worth in a silver half dollar

how to melt silver

how much is a half dollar 1776 to 1976 worth

how much is a silver coin worth uk

how.much is a 1964 kennedy half dollar worth in silver value

how much is a silver coin worth 1 oz