Installing your RALPH LAUREN RL4721 Perren 18 Inch Flush Mount involves several steps. First, gather your tools: a Phillips screwdriver, a slotted screwdriver, a drill, a hammer, and a pencil. Carefully unpack all parts on a clean surface. Remove the mounting plate (B) from the fixture (F) by unscrewing screws (E). Use the mounting plate (B) as a template to mark anchor positions on the junction box. Drill holes slightly smaller than the anchors (I) and insert the anchors. Attach the mounting plate (B) to the junction box using mounting screws (C) and wood screws (J) into the anchors (I). Place the glass (G) into the shade (H), then secure the shade (H) to the fixture (F) with screws (D). Run the support cable through the back of the mounting plate (B), loosen the cable lock, and attach it to the support cable's end; tighten the lock. Wrap the fixture ground wire (bare copper) around the green grounding screw and tighten it. Connect the fixture ground wire to the supply ground wire using a wire nut (A). Connect the fixture neutral wire (white) to the supply neutral wire using a wire nut (A). Connect the fixture hot wire (black) to the supply hot wire using a wire nut (A), ensuring not to reverse the hot and neutral connections. Ensure all wire connections are secure and tuck them neatly into the junction box. Finally, attach the fixture (F) to the mounting plate (B) by securing it with screws (E). Important safety notes: Installation should be performed by someone familiar with construction and local codes. Inspect the fixture for damage before beginning. The fixture requires proper grounding. Clean the fixture with a soft, dry cloth; avoid abrasive cleaners.
