···
Log in / Register

what is a 1900 o silver dollar worth

1Answers
AlessandraMarie
12/01/2025, 03:00:35 AM

Ah, the 1900-O Morgan silver dollar! Asking what it's worth is a bit like asking the price of a car; it all depends on the mileage and condition. This particular coin, minted in the lively city of New Orleans, was produced in plentiful quantities, so you're not exactly holding a one-of-a-kind treasure unless it's in truly spectacular shape.

According to the experts at NGC, a well-loved 1900-O that has seen its fair share of saloon counters and dusty pockets might be worth around $40 to $55 in circulated condition. It's enough to buy a nice lunch, but it won't have you retiring to a private island just yet. This is the coin that has lived a little, and its value reflects its worldly experience.

However, if your coin has been a total shut-in, preserved in a pristine, uncirculated state, the story changes dramatically. A basic Mint State (MS-60) version could fetch about $75, while a dazzling, near-perfect specimen graded MS-66 could command a cool $1,850. Of course, retailers have to keep the lights on, so you might see a "Very Good" grade coin, which a price guide values around $42, listed for as much as $136 from a dealer. In the world of coins, condition isn't just everything—it's the only thing.

Was this review help?
102
Share
More Q&A

How do I cycle through the light modes on my Energizer 39800139061 LED Flashlight?

To change the light modes on your Energizer 39800139061 LED Flashlight, follow these simple steps: First, identify the power button. This is usually located near the tail end or on the side of the flashlight. Press the power button once to turn the flashlight on; this typically activates the high brightness setting. To switch between modes, press the power button repeatedly. Each press will cycle through the available light modes. These modes may include high, low, strobe, or other adjustable settings. Continue pressing the button until you reach the desired mode. The Energizer 39800139061 LED Flashlight will remain in that mode until you change it again. For more detailed instructions and visual aids specific to your model, please consult the user manual that came with your Energizer flashlight.
103
Share

How do I change the batteries in my EASY MAGNIFIER PM1 LED Magnifying Glass?

To replace the batteries in your EASY MAGNIFIER PM1 LED Magnifying Glass, follow these simple steps: First, locate the battery compartment on the handle of your magnifying glass. It's designed to be easily accessible. Next, carefully open the compartment and remove the old batteries. Take note of how the old batteries were oriented – this is crucial for correct installation of the new ones. Now, take two CR1220 lithium batteries and insert them into the compartment, ensuring the positive (+) and negative (-) ends align with the markings inside the compartment. Once the new batteries are in place, securely close the battery compartment. To verify the new batteries are working, you can test the LED light. Make sure to remove the lens and check if the LED light turns on automatically. Regular battery checks are recommended to ensure optimal performance. For visual aids and more detailed information, please consult the 'Setup Guide' in your EASY MAGNIFIER PM1 LED Magnifying Glass User Manual.
120
Share

How do I adjust the remote control frequency on my Harbor Breeze ceiling fan to prevent interference?

To change the frequency of your Harbor Breeze ceiling fan remote and avoid interference with other remote controls, follow these steps: First, remove the battery cover from the back of the remote control. Then, insert a battery, ensuring the positive (+) and negative (-) terminals align with the markings in the battery compartment. Next, locate the dip switches inside the remote. These switches control the frequency. You can set them to either the up or down position; the factory setting is typically up. After adjusting the dip switches, turn the power to your ceiling fan on. Within 30 seconds of powering on the fan, press and hold the "Learn" button on the remote for about one second. The fan's light should blink twice to indicate that the remote has successfully paired with the receiver on the fan at the new frequency. Finally, replace the battery cover. To verify the change, test the remote by pressing any fan speed button. This process helps ensure your Harbor Breeze ceiling fan remote operates without interference from other remotes in the same area.
116
Share

How do I install the PARTPHONER PA-WL-1 Outdoor Wall Light?

Absolutely! Here's a step-by-step guide to installing your PARTPHONER PA-WL-1 Outdoor Wall Light: Inspection : Upon receiving your PARTPHONER PA-WL-1, carefully inspect all components for any signs of damage. Location : Choose a suitable mounting location on an exterior wall or in your desired outdoor space. Preparation : Ensure the mounting surface is clean and free of debris. Mounting : Secure the light fixture to the wall using the provided installation accessories, referring to the detailed illustrations if needed. Wiring : Connect the light fixture to a power source using the appropriate wiring. Bulb Installation : Insert a compatible E26 base bulb into the fixture, ensuring it is properly aligned. Angle Adjustment : Adjust the light fixture's angle to direct the light as desired. App Setup (if applicable) : Download and install the wall light control mobile application. Pairing (if applicable) : Follow the app's instructions to connect your smartphone or tablet to the wall light. Sensor Test (if applicable) : Test the photocell sensor's functionality by covering and uncovering it to simulate changes in ambient light. Settings (if applicable) : Adjust the photocell sensor's sensitivity and other settings to your preference. Weatherproofing : Ensure the light fixture is properly sealed and weatherproofed to protect against moisture and the elements. Operation : Activate the dusk-to-dawn sensor and observe the light's automatic operation. Maintenance : Periodically monitor the light fixture's performance and address any necessary maintenance or repairs. Enjoy : Take advantage of the PARTPHONER PA-WL-1's energy-saving features and convenient operation. For more detailed instructions and diagrams, please consult the user manual.
105
Share

How do I change the height of my LORDEM A0001 Plant Grow Light?

Adjusting the height of your LORDEM A0001 Plant Grow Light is simple, thanks to its flexible design. The grow light features a 360° gooseneck and an adjustable tripod. To change the height, utilize the tripod, which extends from 18 to 47.2 inches. This adjustability allows you to position the light at the ideal distance from your plants, accommodating plants of various sizes. For optimal plant growth, ensure your plants receive the correct amount of light. For precision, consider using a lux meter or a PAR meter app to create a PAR map. This helps you determine the perfect height for the LORDEM A0001 Plant Grow Light, ensuring efficient light distribution and intensity for your plants.
104
Share

How can I tell when my Olight Odin Ultra Compact is fully charged?

To know when your Olight Odin Ultra Compact Rechargeable Flashlight is fully charged, pay attention to the charging indicator light. When you connect the flashlight to charge using the USB magnetic charging cable (MCC3), the indicator will show a red light while charging. Once the light turns green, your Olight Odin Ultra Compact is fully charged (above 95%) or it has been disconnected from the charging source. At this point, it is ready for use and it's best to disconnect it from the charger to avoid overcharging.
109
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.