···
Log in / Register

what are the top 10 most valuable morgan silver dollars

1Answers
StKylie
12/01/2025, 03:47:42 AM

Based on the provided information, the top 10 most valuable Morgan silver dollars are determined by their year, mint mark, and condition, which contribute to their rarity and high value among collectors.

The list of the most valuable Morgan dollars includes the 1893-S, with a value ranging from $3,000 to $1,250,000, and the 1884-S, which can be worth anywhere from $34 to $1,250,000. Another highly valued coin is the 1889-CC, with a price range of $425 to $1,200,000. Other key dates on the list are the 1895-O and 1895-S, valued between $150 and $700,000, and the 1895 Morgan Dollar, which can range from $32,500 to $175,000.

The remaining coins that complete the top 10 list are the 1893-CC ($220-$142,500), the 1885-CC ($440-$130,000), the 1894 Morgan Dollar ($525-$125,000), the 1903-S ($85-$120,000), and the 1879-CC ($150-$90,000).

These silver dollars were originally minted from 1878 to 1904 and again for one year in 1921. The provided text also notes that a record was set when an 1893 Morgan silver dollar from the San Francisco mint sold for over $2 million, making it the highest-selling Morgan dollar ever.

Was this review help?
104
Share
More Q&A

How do I switch input sources for a specific output on my SEADA SWMP 4K Seamless Video Wall Matrix Switcher?

Changing the input source for a specific output on your SEADA SWMP 4K Seamless Video Wall Matrix Switcher is straightforward. You can accomplish this using either the PC tool or the front panel controls: Using the PC Tool: Connect your control PC to the SWMP Matrix via an Ethernet cable. Open the SEADA SWMP Matrix management software. Configure your control PC's IP address to be within the same range as the SWMP Matrix (e.g., 192.168.0.x). Within the software, check the 'Network' box, and then click the 'Search Device' button. Select your SEADA SWMP device from the search results, and then click 'Disconnect'. The PC tool will then display the current input-to-output routing. To modify the routing, select the grid corresponding to the desired outputs, and then choose the desired input source on the same horizontal line. Using the Front Panel: Ensure the 'LOCK' key on the front panel is inactive. If it's active, press the 'LOCK' key to unlock it. Press the output button (1 to 8) corresponding to the output you want to change. Select the input source (1 to 8) you wish to display on that output. Press 'ENTER' to execute the change. For example, pressing 'OUT 1 + IN 1 + ENTER' will display the video from input 1 on the screen connected to output 1. Following these steps, either through the PC tool or the front panel, makes it easy to change the input source for a specific output on your SEADA SWMP 4K Seamless Video Wall Matrix Switcher. For comprehensive information on features like OSD, video wall setup, and IR remote control, please consult the SWMP Matrix User Guide, which is included in the Software & Documentation User CD provided with your purchase.
107
Share

How to Clean the Oven Rack for My Electrolux CKH8000X2 Oven

Keeping your Electrolux CKH8000X2 oven rack clean is essential for optimal oven performance. Here's how to do it effectively: First, remove the oven rack from the Electrolux CKH8000X2 oven. Next, apply a cleaning solution specifically designed for metal surfaces. Gently scrub the rack with a sponge or cloth, ensuring all areas are covered. Rinse the oven rack thoroughly with water to remove any traces of the cleaning solution. Allow the oven rack to dry completely before you put it back in the oven. For best results, clean the oven rack after each use to prevent build-up. Always avoid abrasive cleaners or harsh chemicals to protect the metal. Make sure the rack is completely dry to prevent rust.
109
Share

How do I change the stick mode on my FLYSKY SM001 Flight Sim Controller?

Changing the stick mode on your FLYSKY SM001 Flight Sim Controller is straightforward. Here’s how: First, press and hold the middle button, which is the five-way button, on your controller while turning the simulator on. Next, use the middle button of the left trim button, also a five-way button, to cycle through the throttle modes. The LED indicators will change to reflect the active mode; consult the product manual for the LED status table to identify each mode. Finally, press the middle button of the right trim button, which is another five-way button, to exit the stick switching mode. Following these steps allows you to easily switch between stick modes, such as mode 1 and mode 2, on your FLYSKY SM001 Flight Sim Controller.
106
Share

When should I replace the filters in my Rowenta PU6180F0 Intense Pure Air Home Purifier?

Maintaining your Rowenta PU6180F0 Intense Pure Air Home Purifier is key for peak performance. Here's a filter replacement guide to keep your air clean. The pre-filter needs cleaning every 2 to 4 weeks. The active carbon filter should be replaced every 12 months. Lastly, the Allergy+ filter has a replacement cycle of every 2 years. Always use genuine Rowenta/Tefal filters. Remember to reset the filter replacement indicator on the control panel by pressing the Filter Reset button for 3 seconds after replacing a filter. Consistent filter maintenance ensures your Rowenta air purifier effectively removes pollutants and allergens, providing you with cleaner air.
117
Share

How do I change the cutting height on my GreenWorks 82LM30S lawn mower?

Adjusting the cutting height on your GreenWorks 82LM30S lawn mower is a simple process. Here's how: First, locate the height adjustment mechanism, typically near the wheels. Next, you'll need to remove the locating pin. This usually involves gently pulling a rod backward. Then, to change the height, grab the rod and move it either backward to raise the cutting height or forward to lower it. Finally, once you've selected your desired height, align the upper and lower holes and reinsert the locating pin to secure the adjustment. This ensures your GreenWorks lawn mower cuts your grass to your preferred length, helping you maintain a healthy and aesthetically pleasing lawn.
117
Share

How can I confirm my BB1240 Battery to Battery Charger is operating properly?

To confirm your BB1240 Battery to Battery Charger is functioning correctly, follow these steps: First, check the input and output voltages with the engine running. The input voltage should be approximately 13.5V or higher, confirming the charger receives power from the alternator. The output voltage should be higher, indicating the charger is providing a charging current to the output battery. Second, observe the LED indicators. The orange LED indicates the charging profile (Bulk, Absorption, Float) for both lead-acid and lithium batteries. Also, there is an LED to show charge flow back to the input battery. Third, check the Fault LED. A solid red Fault LED indicates a detected issue; consult the manual for troubleshooting. Fourth, monitor the charging process over time. Ensure the output voltage increases, and the charger maintains the correct charging profile for your battery type (lead-acid or lithium). Fifth, if a temperature sensor is connected, monitor its function to ensure the charger compensates for temperature variations. By following these steps and observing the indicators, you can verify your BB1240 Battery to Battery Charger is working correctly and providing optimal charging support.
106
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.