Installing your TROY LIGHTING B4143 Blink Wall Light safely and correctly involves these steps:
-
Prepare the Fixture: Unpack the fixture, glass diffuser, and parts bag. Confirm all parts are present before discarding the packaging.
-
Install the Fixture:
- Secure the mounting ring to the junction box, ensuring the green ground screw faces outward.
- Connect the fixture's ground wire to either the green or bare copper wire in your outlet box, or to the green ground screw on the mounting ring. Important: Never connect the ground wire to the black (hot) wire.
- Using an approved wire connector (wire nut), join the white fixture wire to the white wire in the junction box. Seal the connection with electrical tape.
- Connect the black fixture wire to the black wire in the junction box, securing the connection.
- Fasten the fixture to the junction box using the provided mounting screws.
- Install candelabra-based lamps, using 60-watt type B, BA, C, or CA bulbs. Do not exceed the specified wattage.
- Place the glass diffuser into position.
-
Safety First:
- Always disconnect the power supply before wiring or replacing bulbs.
- Ensure the installation complies with all relevant national and local electrical and building codes.
- Installation and any necessary maintenance should be carried out by a qualified electrician or certified technician.
- Be careful to prevent any exposed wires or strands that could cause a short circuit.
-
Finalizing the Installation: After the fixture is securely mounted and wired, restore power to the circuit at your breaker or fuse box. Following these steps will help you safely and effectively install your TROY LIGHTING B4143 Blink Wall Light.