Installing the LNC A04846W1 Barbara Matte Black and Satin Gold Wall Sconce requires careful attention to safety and detail. Here's a step-by-step guide:
-
Safety First Power Off: Before beginning, shut off the power at your home's circuit breaker or fuse box. Also, switch off the wall switch controlling the existing light fixture.
-
Assembly Steps: Follow these steps to assemble the sconce:
- A1 Unscrew the nuts (F) from the backplate (E). Set the nuts aside for later use.
- A2 Feed the electrical supply wires from your outlet box through the mounting plate (D). Secure the mounting plate to the outlet box using the provided mounting screws (A).
- A3 Connect the wires according to the instructions in the manual. Use plastic wire connectors and electrical tape to ensure secure and correct connections.
- A4 Align the backplate (E) with the mounting screws that are pre-assembled. Attach the backplate to the mounting plate (D) using the nuts (F) you set aside. Ensure the backplate sits flush against the wall.
- A5 Remove the socket ring (I) from the socket (G). Place the lampshade (H) onto the socket, and secure it with the socket ring. Install a light bulb (not included) that matches the recommended wattage.
-
Final Checks: Double-check that all components are properly secured before restoring power.
-
Additional Guidance: Consider these helpful tips:
- Make sure the wall surface is clean, dry, and capable of supporting the sconce's weight.
- Use the correct voltage (120V) and a bulb with a maximum wattage of 60W.
- Keep the lamp away from harsh chemicals.
- When changing the bulb, allow the lamp to cool down before handling.
If you find the installation challenging, it's always best to consult a qualified electrician.
