What are the steps for attaching the Wi-Fi/ZigBee antenna to the inverter?

[GarrettLee]

To correctly attach the Wi-Fi/ZigBee antenna to your inverter, follow these steps: First, after mounting the inverter, unpack the antenna clip and release any cable ties. Next, ensure safety by turning off the inverter's main switch, the safety switch (if present), and the AC breaker connected to the inverter. Confirm the AC power is off; either verify this or disconnect the AC by switching off the circuit breakers in your distribution panel, and then wait five minutes for the capacitors to discharge. Now, insert the clip from underneath the inverter, positioning it between the bracket and the back of the inverter. Guide the antenna cable up along the inverter's fins, threading the clip and RF cable from the bottom. Finally, secure the clip vertically at the top of the inverter, either to the heat sink fins or the side of the inverter. Once complete, you can safely turn the inverter's main switch, safety switch (if applicable), and the AC breaker back on. By adhering to these instructions, you'll successfully attach the Wi-Fi/ZigBee antenna to your inverter, as per the manufacturer's guidelines.