What are the key FCC and IC compliance considerations when integrating the Texas Instruments CC2652PSIP module?

1Answers

ZaneLynn

12/17/2025, 06:16:48 PM

Integrating the Texas Instruments CC2652PSIP module into your product requires careful attention to FCC and IC regulations. To ensure your product meets these standards, consider the following:

Antenna Placement: Maintain a minimum separation of 20 cm between the antenna and users. Avoid co-locating the module's transmitter with other transmitters or antennas.
RF Transmission Power: Limit the maximum RF power in the 2.4 GHz band to 10 dBm. Ensure that the antenna gain, including cable loss, does not exceed 5.3 dBi for low-power PA or 3.3 dBi for high-power PA in the 2.4 GHz band.
Certification Requirements: Adhere to FCC and IC certification conditions for OEM integrators, including proper labeling of the end product with the FCC ID and IC information. If specific configurations prevent meeting these conditions, re-evaluation and separate authorization may be necessary.
RF Radiation Exposure: Comply with FCC and IC RF radiation exposure limits by maintaining a minimum distance of 20 cm between the radiator and the user's body. Follow device classifications (portable vs. mobile) guidelines and consult regulatory test labs if needed.
End Product Labeling: Clearly display the FCC ID and IC information on your host system labels for compliance. By following these guidelines, you can help ensure your product's compliance with FCC and IC regulations when using the Texas Instruments CC2652PSIP module.

Was this review help?

119

More Q&A

How do I safely set up and use the Sygonix 2522646 Adapter with switch?

To connect and operate your Sygonix 2522646 Adapter with switch, follow these instructions to ensure safe and proper use: Intended Use and Safety First: The Sygonix 2522646 Adapter is designed for indoor use only, allowing you to easily switch electrical devices on and off via its integrated switch. Avoid using it in moist environments. Always read the operating instructions thoroughly before use. Keep the adapter away from children and pets. Protect the adapter from extreme temperatures, direct sunlight, and physical stress. If the adapter is damaged or malfunctions, discontinue use and consult a professional. Electrical Safety Precautions: Verify that your local AC mains voltage matches the specifications printed on the adapter's nameplate. Always plug the adapter into a mains socket with a protective earth contact. Avoid connecting multiple adapters in series and ensure use in dry rooms only. Never pour liquids on the adapter and unplug it during thunderstorms. Step-by-Step Operation: Begin by setting the on/off switch to the '0' (off) position. Insert the plug of the appliance you wish to use into the protective earth socket on the Sygonix adapter. Plug the Sygonix adapter itself into a properly grounded mains socket. Use the on/off switch to control the appliance: 'I' position turns the device on, and '0' turns it off. The LED indicator will illuminate red when the adapter is switched on and turn off when the adapter is off. Maintenance and Cleaning: Before any cleaning, always unplug the adapter from the mains socket. Clean the adapter with a dry, lint-free cloth. Avoid using harsh detergents. You can remove dust using a soft brush or a vacuum cleaner. By following these guidelines, you can safely and effectively use the Sygonix 2522646 Adapter with switch.

109

How do I optimally load my NEFF SBV6EB800E Fully Integrated Dishwasher for the best cleaning results

To achieve the best cleaning performance with your NEFF SBV6EB800E Fully Integrated Dishwasher, proper loading is key. Follow these guidelines: For the bottom rack, place larger items like pots, pans, and plates facing downward towards the spray arm to ensure thorough cleaning. Avoid obstructing the spray arm with oversized items. In the top rack, arrange glasses, cups, and smaller items. Ensure glasses are secure and not touching each other to prevent breakage. The cutlery basket should be used to place cutlery in the designated slots with handles facing downwards for safety and optimal cleaning; separate spoons, forks, and knives. For larger utensils, lay them flat in the designated sections of the cutlery basket so they don't interfere with the spray arms. Secure lightweight plastic items in the top rack. Remember to avoid overloading the dishwasher, and leave space between items to allow water and detergent to reach all surfaces. Adhering to these loading tips will help you maximize the cleaning efficiency of your NEFF SBV6EB800E and achieve sparkling results with every wash.

103

How can I tell when my HiKOKI DH 36DPD Rotary Hammer battery is fully charged

To determine when your HiKOKI DH 36DPD Rotary Hammer battery is fully charged, pay attention to the charge indicator lamp. During charging, the lamp will blink blue. Once the battery reaches a full charge, the indicator lamp will change to a solid green, signaling that it is ready for use. Charging times can fluctuate based on battery specifics and environmental conditions. Refer to your HiKOKI DH 36DPD Rotary Hammer Instruction Manual for detailed information.

102

What temperature ranges are safe for the EATON GHG 624 Explosion-Protected Circuit Breaker, and why are they important?

The EATON GHG 624 Explosion-Protected Residual Current Operated Circuit Breaker's ambient temperature ranges are vital for its correct and safe operation. These ranges, as specified in the instruction manual, vary based on the application's size and category. For the GHG 624 series, you can expect the following: IIC, sizes 1 to 4: -20°C to +55°C (for both Serie A and Serie E). IIB, sizes 1 to 2: -45°C to +55°C (for both Serie A and Serie E). IIB, sizes 3 to 4: -20°C to +55°C (for both Serie A and Serie E). These operating temperature ranges are directly tied to explosion protection parameters, dictating the maximum permissible temperatures for the flameproof enclosure's materials. If you need to operate outside these ranges, it's essential to consult with the manufacturer, Cooper Crouse Hinds. Maintaining the correct ambient temperature is crucial for the circuit breaker's functionality and safety in hazardous environments. Deviating from these limits could negatively affect the device's performance and safety features.

105

How can I make sure my Origin 21 46147PHXLG peg rail is level during installation

Ensuring your Origin 21 46147PHXLG 17.5-Inch 5 Peg Rail is perfectly level during installation is key to a professional finish. If you find the rail isn't level, the initial measurements might need adjustment. To fix this, start over by re-measuring and marking the wall. Precisely mark the mounting hole locations. A level tool is essential; use it to verify each mark is level before drilling. Once you've drilled the holes, check the rail again with the level as you secure it to the wall. Double-checking your measurements and using a level tool throughout the process will help you achieve a perfectly level and beautifully installed peg rail.

117

What's the best way to safely handle the glass or mirrors when assembling my Zossen Accent Chair?

When assembling your Ashley Furniture Zossen Accent Chair (model A3000146), safety is paramount, particularly when handling glass or mirrors. The instruction manual emphasizes the need for extreme caution. These components can cause serious injury if broken. It's strongly advised not to attempt to handle large glass or mirror pieces alone. Always enlist the help of another person to assist you. Remember to use proper lifting techniques and be mindful of your surroundings to prevent accidents. Taking these precautions will help ensure a safe and enjoyable assembly experience.

107

What are the key FCC and IC compliance considerations when integrating the Texas Instruments CC2652PSIP module?

How do I safely set up and use the Sygonix 2522646 Adapter with switch?

How do I optimally load my NEFF SBV6EB800E Fully Integrated Dishwasher for the best cleaning results

How can I tell when my HiKOKI DH 36DPD Rotary Hammer battery is fully charged

What temperature ranges are safe for the EATON GHG 624 Explosion-Protected Circuit Breaker, and why are they important?

How can I make sure my Origin 21 46147PHXLG peg rail is level during installation

What's the best way to safely handle the glass or mirrors when assembling my Zossen Accent Chair?

How do I properly clean and maintain the HEPA filter for my BRAYER BR4209 Cordless Vacuum?

How to change the cutting length on my MOSER 1170 Opal Hair Clipper?

How can I tell when the battery in my ILBLP CP HE SD Emergency LED Driver is fully charged?

How do I install the Puig 20713 V-Tech Line Touring Windshield on my motorcycle?