The BACA SYSTEMS Robo SawJet 3.0 Robotic Stone Cutting Jet Saw demands specific electrical configurations to ensure optimal performance. The system necessitates two distinct power circuits in addition to a reliable internet connection. The Robot Controller Power requires 480 VAC, 3-phase power, protected by a circuit breaker or fused disconnect rated for 80 amps. Please note that copper wiring of the appropriate gauge must be used, as the terminal lugs are not designed for aluminum wiring. If your facility's voltage is lower than 480 VAC, a step-up transformer will be necessary. The Waterjet Pump Power also operates on 480 VAC, 3-phase power and should be protected by a circuit breaker or fused disconnect rated for 100 amps. Similar to the Robot Controller, copper wiring of the correct size is mandatory, and a step-up transformer may be needed depending on your facility's voltage supply. Finally, a high-speed, hard-wired internet connection is essential for the system's operation. A Cat 5 cable will be connected to the control panel, and access through your firewall must be configured to allow for remote administration via TeamViewer. To guarantee safe and compliant electrical installation, it is crucial to consult with a licensed electrician. BACA Systems installers are not authorized to perform any electrical work related to connecting the machinery to your facility's power supply.
