Need help setting up the StarTech.com ST12MHDLNHK HDMI Over IP Extender? Step-by-step guide needed

[SanLyla]

Absolutely! Here's a straightforward guide to help you set up your StarTech.com ST12MHDLNHK HDMI Over IP Extender:

1. Preparation: First, locate your HDMI-enabled video source (like a computer or Blu-ray player) and your HDMI-enabled display (such as a TV or projector). Position them where you want them.
2. (Optional) Receiver Placement: If you're using extra receivers (ST12MHDLNHR), determine where you'll place the displays connected to them.
3. Transmitter Connection: Use an HDMI cable to connect the video output of your source device to the HDMI input on the transmitter unit.
4. Power Up the Transmitter: Plug the transmitter into a power outlet using the provided adapter.
5. Receiver Connection: Place the receiver unit near your display device.
6. Receiver HDMI Connection: Connect an HDMI cable from your display's input to the HDMI output on the receiver.
7. Power Up the Receiver: Plug the receiver into a power outlet using its power adapter.
8. Network Connection: Use an RJ-45 terminated CAT5/5e/6 Ethernet cable to connect the LAN port on the transmitter to the LAN port on the receiver.
9. DIP Switch Configuration: Ensure the rotary DIP switches on both the transmitter and receiver are set to the same position or channel. This is crucial for them to communicate.
10. Power On: Turn on all devices and allow a moment for them to establish a connection. Your video should now appear on the display connected to the receiver.

Note: If using a local area network (LAN), you might need additional steps, such as connecting the devices to your network and configuring IP addresses. See the "IP Configuration" section of the ST12MHDLNHK instruction manual for detailed instructions. For more in-depth information and troubleshooting tips, refer to the StarTech.com ST12MHDLNHK HDMI Over IP Extender Instruction Manual.