Setting up your Hampton Bay G40C 8X5 Pop Up Grill Gazebo involves a few key steps. First, always ensure you have all the parts, including the frame, lower leg assembly, steel table, small top, large top, xxxx, and stakes. Begin by setting up the canopy. With a partner, lift one leg of the frame in each hand slightly off the ground. Step backward while pulling the legs away from each other to bring the truss closer together vertically. Pull out the telescopic poles until they click and lock at 80%. Unfold the small top and place it over the opened frame, attaching the corners to the frame. Next, unfold the large top, place it over the frame ensuring the neckband is under the small top, and attach its corners. Attach the steel table to the frame using a xxxx. Secure the canopy on grass or soft ground using stakes. To open the canopy frame, lift the frame slightly off the ground, especially in tall grass or sand. Grasp the trusses away from the connections to avoid pinching and open the frame to 80%-90% for easier canopy fabric installation. To lock the frame, start on a short side with a partner, place one hand on the upper corner, and push the truss straight up until it clicks into place. Repeat this for the remaining legs. Insert the lower leg by lifting the frame with a partner and aligning the groove on the lower leg with the indentation on the upper leg, inserting the leg and turning counterclockwise to lock it. Finally, install the tables by having one person hold the table in position while another person attaches it to the leg using the xxxx. Secure the canopy in place by inserting stakes into the foot of each canopy leg. Following these steps will help you set up your Hampton Bay G40C 8X5 Pop Up Grill Gazebo safely and enjoy your outdoor space.
