Need help installing my ZEVNI A04786 Yuba 3-Light Flush Mount Light? Can you guide me through the process?

[DiJake]

Absolutely! Here's a straightforward guide to help you install your ZEVNI A04786 Yuba 3-Light 11-in Black Flush Mount Light:

1. Gather Your Tools: Make sure you have all the necessary tools on hand, as listed in the ZEVNI A04786 Yuba manual.
2. Power Down: Safety first! Turn off the power at both the fuse box and the wall switch before you start.
3. Mount the Single Bar: Unscrew the hex nut and cap nut from the single bar (C). Attach the single bar to the outlet box using the mounting screws (B). Ensure the "GND" side is facing outwards.
4. Connect the Wires: Carefully connect the wires according to the wiring diagram in the manual. Make sure the ground wires are correctly connected.
5. Secure the Canopy: Position the canopy (E) against the ceiling and secure it by tightening the hex nut and cap nut onto the pre-assembled threaded portion of the single bar (C). Adjust the threaded portion length if needed.
6. Attach the Glass Shades: Remove the socket rings (J) from the sockets (F). Place the glass shades (I) onto the sockets and secure them with the socket rings.
7. Install the Bulbs: Insert the correct type of light bulbs (not included) into the sockets. Note the recommended maximum wattage on each socket.
8. Final Check: Before turning the power back on, double-check all connections and ensure everything is securely in place. If you have any further questions, consult the ZEVNI A04786 manual or contact ZEVNI customer support.