Installing your AZDOME M550 Dash Cam is straightforward Follow these steps for a successful setup 1 Insert and Format the Micro SD Card Ensure you're using a high-speed Micro SD card Class 10 or higher. Insert the card into the designated slot on the dash cam and format it via the dash cam's menu. 2 Attach the Magnetic Bracket Securely attach the magnetic bracket to the dash cam. This bracket is designed for a firm connection. 3 Power Down Your Vehicle Turn off your car's engine before proceeding. 4 Mount the Dash Cam on Your Windshield Attach the magnetic bracket with the camera to your windshield. Ensure the camera is positioned correctly and has a clear view of the road. 5 Connect the Power Cable Connect the USB charging cable to the mini USB port on the magnetic bracket. Neatly route the cable along the edges of your windshield and tuck it into the seams to keep it out of sight and to the USB port of your car charger. Avoid routing the cable in a way that could interfere with airbags. 6 Connect the Cabin and Rear Cameras If applicable, plug in both the cabin and rear cameras. Adjust the dash cam to ensure the lens is level with the ground for optimal recording. 7 Test the Installation Start your car's engine to confirm the dash cam is functioning correctly. Rear Camera Installation Instructions For the rear camera installation refer to the user manual which provides detailed instructions and illustrations. Generally, you'll select a suitable location near the number plate lamp, secure the camera using the provided tape and screws and connect the rear plug to the rear camera interface on the recorder For the most detailed guidance and visual aids, consult your AZDOME M550 Dash Cam user manual. It contains specific illustrations and instructions for the rear camera installation.
