To descale your DeLonghi ECAM 22X.2Y Bean To Cup Espresso And Cappuccino Machine, follow these easy steps: First, ensure the machine is in standby mode (off but plugged in). Remove the water tank and empty it. Next, prepare a descaling solution using the recommended amount of De'Longhi descaler mixed with water, following the descaler product instructions. Pour the solution into the water tank, filling it to the MAX level indicated. Place a container, with a minimum capacity of 2 liters, under both the coffee spout and the cappuccino maker. Now, press and hold the descale button (often labeled as B4) for about 5 seconds, until the descale LED begins to flash rapidly. The machine will then automatically begin the descaling cycle, alternating between pauses and dispensing liquid from the steam/hot water spout and the coffee spout; this process cleanses the machine's internal components. Once the descaling cycle is complete, the low water level indicator (often labeled as B10) will illuminate. Empty the container used for collecting the descaling solution, and rinse it thoroughly. Remove, empty, and refill the water tank with fresh water, to the MAX level. Press the descale button again to start the first rinse cycle. A medium intensity LED will blink to indicate the rinse is in progress. After the first rinse, empty the container and repeat the rinse process a second time using fresh water. Upon completion of the second rinse, the descaling procedure is finished. Empty the container and refill the water tank. Finally, reassemble all the components, and your DeLonghi machine is ready for use. For the most detailed instructions, always consult the specific user manual for your ECAM 22X.2Y model, as there may be slight variations.
