Threading your Flying Banana 0002 portable sewing machine is straightforward. Here is a step-by-step guide:
- Safety First: Begin by turning off the sewing machine and unplugging it from the power source.
- Needle at the Ready: Raise the needle to its highest position. You can do this by turning the handwheel towards you.
- Spool Placement: Place your thread spool on the spool pin, typically found at the top of the machine. Make sure the spool spins freely.
- Thread Guide Path: Take the thread end and guide it through the thread guide. The machine usually has an arrow or a numbered path to follow.
- Tension Discs: Thread the thread through the tension discs. These are usually located near the needle area. Ensure the thread is correctly seated between the discs.
- Take-Up Lever: Locate the take-up lever, a metal hook or lever that moves up and down. Thread the thread through the take-up lever from right to left.
- Needle Threading: Thread the needle using the needle threader. Consult your user manual if you need assistance.
- Secure the Thread: Lower the presser foot and hold onto the thread end.
- Bobbin Thread Catch: Turn the handwheel to lower the needle into the fabric and then raise it back up. This will catch the bobbin thread.
- Bringing Up the Bobbin Thread: Pull the bobbin thread up through the needle plate, using the top thread. Gently pull both threads towards the back.
- Finishing Touches: Trim the excess thread, leaving about 6 inches.
- Ready to Sew: Your Flying Banana 0002 portable sewing machine is now threaded. You can now choose a stitch pattern and start sewing. For visual guidance, please consult the user manual that came with your Flying Banana 0002.
