How to program the remote for the Directed 3100L Avital 1-Way Security System

[StAbel]

Programming your remote control for the Directed 3100L Avital 1-Way Security System is straightforward. Here's a step-by-step guide:

1. Activate the System: Open any door of your vehicle.
2. Ignition Cycle: Turn the ignition to the 'on' position, then turn it 'off'.
3. Enter Programming Mode: Press and release the Valet/Program switch the number of times corresponding to the desired channel you wish to program for the remote (consult the Features Menu in your Directed 3100L manual for channel details).
4. Initiate Programming: Press and hold the Valet/Program switch until the LED indicator begins flashing.
5. Select Remote Button: While still holding the Valet/Program switch, press the specific button on your remote control that you want to assign to the chosen channel.
6. Confirmation: The system will chirp to signal that the remote button has been successfully programmed.
7. Exit Programming: Release the Valet/Program switch.

Important Considerations:

You can program up to four remotes to your Directed 3100L system. Always refer to your system's manual to verify button assignments for specific features. For more detailed instructions and advanced programming features, please consult the complete Directed 3100L Avital 1-Way Security System Installation Guide.