How to Install the Origin 21 Golani LED Wall Sconce Plug-In or Hardwire?

[LeBeckett]

Installing your Origin 21 42632 Golani LED Wall Sconce is straightforward whether you choose the plug-in or hardwire method. Here's a step-by-step guide for both:

Plug-In Installation:

1. Safety First: Shut off the circuit breakers and the wall switch controlling the power supply.
2. Mark & Mount: Decide where you want your sconce and mark the anchor points on the wall. Drill holes and insert the anchors.
3. Hang the Wall Plate: Secure two screws into the anchors, leaving enough exposed to hook into the wall plate's keyhole slots. Align the wall plate with the screws and slide it down to secure.
4. Light it Up: Install the LED bulb into the fixture's socket.
5. Add the Globe: Attach the glass globe by twisting it firmly clockwise.
6. Power On: Restore power at the circuit breaker.
7. Plug & Play: Plug the sconce's power cord into a nearby outlet and switch the fixture on.

Hardwire Installation:

1. Safety First: Turn off the circuit breakers and the wall switch controlling the power supply.
2. Prep the Fixture: Remove the wall plate by unscrewing and removing the caps.
3. Mount the Bracket: Use the mounting bracket screws to attach the bracket to the outlet box.
4. Grounding: Loosen the ground screw on the mounting bracket and wrap the green/bare (ground) supply wire around it. Tighten the screw to secure the ground wire.
5. Remove the Power Cord: Detach the power cord from the fixture by disconnecting the wires from the preassembled wire connectors and pulling it through the grommet.
6. Secure the Grommet: Insert the plug button through the grommet and secure it with the hex nut.
7. Make Wire Connections: Use the wire connectors to connect:
   • Ground: Connect the bare/green (ground) supply wire to the copper wire.
   • Neutral: Connect the white (neutral) supply wire to the white wire.
   • Hot: Connect the black (hot) supply wire to the black wire from the switch.
8. Attach the Fixture: Insert the screws preassembled to the mounting bracket through the fixture holes and secure them with the caps.
9. Install Bulb: Put the LED bulb into the socket.
10. Add the Globe: Twist the glass globe clockwise to attach it.
11. Restore Power: Turn the power back on at the circuit breaker.
12. Activate the Sconce: Switch the fixture to the ON position. For any additional information or troubleshooting, please refer to the instruction manual that came with your Origin 21 Golani LED Wall Sconce.