How to Install Autry Diffusers on Lithonia Lighting FMPANL LED Fixtures?

[IsabelaLynn]

Installing the Autry Diffusers on your Lithonia Lighting FMPANL LED fixtures is straightforward. Here's a step-by-step guide to help you: First, always check that you have all the necessary parts by referring to the Fixture Parts List in your manual.

For FMPANL 6 fixtures:

1. Snap two support clips into the slots on the fixture housing.
2. Lift the 6" Autry Diffuser to the housing, aligning its mounting slots with the support clips.
3. Push the diffuser up against the housing until it snaps securely into place.

For FMPANL 11 or FMPANL 14 fixtures:

1. Position the 11" or 14" diffuser near the housing, aligning the wide installation slots on the diffuser rim with the supports on the housing.
2. Push the diffuser up and rotate it clockwise until the supports align with the smaller mounting slots, securing the diffuser.

After installation, restore power at your fuse or circuit breaker to verify the installation's success. To clean the fixture, use a soft cloth. For the diffuser, use mild soap and water. Avoid abrasive materials. If you need further assistance, call Technical Support at [phone].