How to Inflate and Deflate Your Bixbee Buccaneer Pirate Ship

[Gonzalez]

Here's how to inflate and deflate your Bixbee Buccaneer Pirate Ship:

Inflating the Pirate Ship Base:

1. Set up the pirate ship in a clear indoor area, ensuring a 2-meter (6.6 ft) obstacle-free zone.
2. Unfold the ship completely, positioning the built-in motor near a 120-volt AC wall outlet.
3. Open the cord storage area and carefully extend the power cord.
4. Plug the cord into the wall outlet.
5. On the control panel, switch to the INFLATE position.
6. Allow the base to inflate until firm, with slight wrinkling remaining in the seams. Then, switch to OFF. Avoid over-inflation.
7. Secure the power cord in the control panel's storage compartment before allowing children to play.

Inflating the Pirate Ship Sides and Back:

1. Locate and open the inflation valve(s).
2. Inflate the sides and back using either your mouth or a handheld electric pump.
3. Once inflated, close the valve immediately and press firmly.

Deflating the Pirate Ship Base:

1. Find the large air outlet near the control panel and open it.
2. On the control panel, switch to the DEFLATE position.
3. Once deflated, switch to OFF, unplug the unit, and store the cord inside the control panel door.

Deflating the Pirate Ship Sides and Back:

1. Find the valve(s) on the base, sides, and back.
2. Open the large valve(s) and press down on the product to release all air.

Following these steps ensures proper inflation and deflation of your Bixbee Buccaneer Pirate Ship, as per the manufacturer's recommendations. Always adhere to the safety guidelines and precautions detailed in the product manual for safe and enjoyable use.