How to Easily Adjust the Height of a VONN VCP2101 Pendant Light?

[StSienna]

Adjusting the height of your VONN VCP2101 5-inch 1-Light Integrated LED Pendant Lighting Fixture is straightforward. Here's a step-by-step guide:

Step 1: Height Adjustment

1. Hold the fixture's canopy up to the ceiling's outlet box to determine the desired length.
2. Locate the locking pin on the canopy. Depress and hold this pin while gently pulling down or pushing up on the cable to adjust the height. Repeat this process for each cable.
3. For ease and safety, it is recommended to have two people during this step: one to hold the fixture and the other to adjust the cables.

Step 2: Install Mounting Bracket

1. Secure the mounting bracket (Part A) to the outlet box using the outlet screws (Part B).

Step 3: Connect the Wiring

1. Connect the supply wires: Black (from the fixture) to Black (Hot Wire from the outlet box).
2. Connect the neutral wires: White (from the fixture) to White (Neutral Wire from the outlet box).
3. Connect the ground wires: Bare Copper (from the fixture) to Green or Bare Copper (Ground Wire) from the outlet box.
4. Twist the wires together clockwise and secure them with the wire connectors (Part C).
5. If a ground wire isn't available in the outlet box, attach the Bare Copper (Ground Wire) from the fixture to the ground screw (Part D) on the mounting bracket.

Step 4: Mount the Fixture

1. Secure the canopy to the mounting bracket (Part A) using the canopy screws (Part E).

Step 5: Power On

1. Turn the electricity "ON" at your main fuse box.
2. Test the fixture by placing a recommended ELV-type dimmer switch in the "ON" position.

Following these steps will help you adjust the height of your VONN VCP2101 pendant light correctly. If you have any further questions or run into issues, please consult the VONN VCP2101 installation guide or contact VONN Lighting Customer Service for assistance.