How to connect my PETLIBRO Automatic Cat Feeder to Wi-Fi for app control?

[Gabriel]

Connecting your PETLIBRO Automatic Cat Feeder to Wi-Fi allows for convenient control via the app. Here's a step-by-step guide:

Before you begin:

• Ensure Bluetooth is enabled on your mobile device.
• Set up the feeder indoors, away from direct sunlight.

Wi-Fi Connection Requirements:

• The feeder only supports 2.4GHz Wi-Fi networks. If your router broadcasts only a 5GHz signal, configure it to also broadcast a 2.4GHz signal.
• Your Wi-Fi password should be limited to 12 digits and letters; special characters are not supported.
• Place the feeder close to your router, ideally within 6 meters and without walls obstructing the signal.

Troubleshooting:

• If the connection fails, reset the feeder by pressing and holding the reset button for 6 seconds. Wait 2 minutes before attempting to reconnect.

App Connection Instructions:

1. Open the PETLIBRO app and navigate to the Home page.
2. Tap 'Add Device' or the '+' icon in the upper right corner.
3. Select 'PLAF101 Wi-Fi Feeder' from the device options.
4. Follow the on-screen prompts and verify the Wi-Fi indicator on the feeder is flashing.
5. Choose 'Bluetooth' in the top right corner of the screen.
6. Enable Bluetooth on your phone.
7. Confirm the indicator on the feeder flashes once every 0.5 seconds.
8. Tap 'Next'. If the indicator isn't flashing, select 'Reset Device Step by Step' and complete the instructions.
9. Add the device 'PLAF101' by entering your Wi-Fi account details and password, ensuring you're connected to a 2.4GHz network.

Once successfully connected, you can manage feeding schedules and portion sizes for your cat directly from the PETLIBRO app.