Assembling your Draper 94185 4 Tonne Body Repair Kit is straightforward. Follow these steps for proper setup and use:
-
Unpacking and Inspection: Carefully unpack your kit and check all components for any shipping damage. Ensure all parts listed in the manual are present. Keep the packaging in case you need to return the kit under warranty.
-
Kit Contents Overview: Your kit includes the pump and ram, plus various attachments such as a spreader, extension bars, flat base, flange base, flange head, wedge head, 90° V base, male connector, cap head, and rubber head. Understanding these components is key to effective use.
-
Ram Attachment Guide: The extension bars can be combined to achieve the necessary length. Use the male connector to attach the ram's female end to a base. Different heads like the flat base, 90° V base, cap head, rubber head, wedge head, flange base, and flange head are designed for specific repair tasks.
-
Assembly Steps: Attach the correct base to the stationary side of the ram and the suitable head to the pushing end. Position the ram with the base against a frame member, opposite the damaged area. Direct the pushing end towards the area needing repair and gradually apply pressure using the pump.
-
Spreader Setup Instructions: The spreader is useful when the ram is too long for the repair area. Before attaching the hose, clean the hose end and the spreader inlet. Connect the hose to the spreader following the manual's guidance.
-
Operation and Safety: Always adhere to the manual's operation instructions for the pump, ram, and spreader. Prioritize safety during operation to prevent injury or damage. By following these instructions, you'll be well-equipped to use your Draper 94185 4 Tonne Body Repair Kit effectively.
