···
Log in / Register

how much is a 1964-d silver half dollar worth

1Answers
ColtonRose
12/01/2025, 01:48:28 AM

Hello there! That's a great question about a very popular and historic coin. The 1964-D Kennedy half dollar holds a special place for many collectors.

The value of your 1964-D half dollar depends on two main things: its silver content and its condition. All Kennedy half dollars made in 1964 are composed of 90% silver, which gives them a base value tied to the current price of silver. This is often called its "melt value." Because the silver market fluctuates daily, this value changes, but you can typically expect it to be worth many times its 50-cent face value, often in the range of $10 or more just for its silver.

The "D" on your coin indicates it was minted in Denver. For a common, circulated coin from 1964, the mint mark doesn't drastically change its worth from one minted in Philadelphia (which has no mint mark for that year).

Where the value can really increase is with the coin's condition. If your coin is in average circulated condition, its value will be very close to its silver melt value. However, if it's an uncirculated coin that looks brand new with no signs of wear, its value to a collector could be higher, perhaps in the $15 to $25 range. For exceptionally well-preserved examples that have been professionally graded, the price can climb much higher.

While the provided search results point to reputable coin pricing guides like Greysheet and NGC, they didn't include the specific price charts. The values mentioned here are based on general market information. For the most current price, it's always a good idea to check the live price of silver or consult a recent coin pricing guide.

Was this review help?
112
Share
More Q&A

How do I charge my new Fitbit Sense?

Charging your Fitbit Sense smartwatch is straightforward. First, connect the charging cable to a USB port on your computer, a UL-certified USB wall charger, or any other low-energy charging source. Next, align the other end of the charging cable with the port on the back of your Sense. The cable attaches magnetically, ensuring a secure connection. For a quick charge, 12 minutes will give you approximately 24 hours of battery life. To check the charging status, either double-tap the screen or press the button; the battery level will display for a few seconds. A full charge typically takes about 1-2 hours. Keep in mind that battery life can vary based on usage. For detailed information, consult the Fitbit Sense user manual.
116
Share

How do I set up and use the ENDORFY EY1B004 USB Microphone for streaming?

Setting up and using your ENDORFY EY1B004 USB Microphone for streaming is straightforward. Here's how to get started: Placement: Position the ENDORFY EY1B004 on a stable surface where you can easily reach it during your streams. Ensure it's securely mounted to prevent accidental damage. Connection: Simply plug the USB cable from the microphone into an available USB port on your computer. It's designed for plug-and-play functionality, so no extra drivers should be needed. Safety First: Always refer to the user manual for important safety instructions. This includes keeping the microphone away from moisture and handling it with care to avoid damage. Environment: The ENDORFY EY1B004 is made for indoor use under normal humidity conditions. Avoid using it outdoors. Cleaning: To keep your microphone in top shape, clean it gently with a dry, clean cloth. Avoid any liquids or cleaning agents. Troubleshooting: If you encounter any issues, disconnect the microphone from the power source and contact Endorfy Technical Support for assistance. Do not attempt repairs yourself. Disposal: When it's time to dispose of your ENDORFY EY1B004, follow local environmental regulations and return it to a collection point or the seller. Do not dispose of it with regular household waste. By following these steps, you'll be ready to start streaming with your ENDORFY EY1B004 USB Microphone.
118
Share

How do I install extra fans in my DEEPCOOL CL500 Mid-Tower case to improve cooling?

Upgrading the cooling in your DEEPCOOL CL500 Mid-Tower case is straightforward. Here's how to install additional fans for enhanced airflow: Fan Compatibility: The CL500 case offers flexible fan mounting options: Front: Supports 3x120mm fans or 2x140mm fans. Top: Accommodates 2x120mm fans. Rear: Fits 1x120mm fan. Installation Steps: Front Fans: Begin by removing the front panel, as detailed in the DEEPCOOL CL500 user manual. Secure the fans (either 3x120mm or 2x140mm) to the front panel using the screws provided. Top Fans: Access the top fan mounting locations by removing the top panel. Attach the 120mm fans here with the appropriate screws. Rear Fan: Install a 120mm fan at the rear fan location. Power Connection: Connect the fans to the fan headers on your motherboard or a fan controller for power. Refer to your motherboard or fan controller documentation for guidance. Testing: After installation, power on your system. Verify that the fans are spinning correctly to confirm the proper setup. Consulting the DEEPCOOL CL500 Mid-Tower Case user manual can provide visual aids for the installation process.
116
Share

How do I properly clean my AiM AMW20MA microwave oven?

Maintaining your AiM AMW20MA 700W 20 Litre Manual Microwave Oven is easy with these cleaning steps: First, always unplug the microwave from the power supply before cleaning to ensure safety. For the interior, wipe down the cavity walls after each use with a slightly damp cloth to remove food splatters. The glass tray and turntable ring assembly can be washed with warm, soapy water. When cleaning the door frame and seal, use a damp cloth to remove any grime. Avoid harsh abrasive cleaners or metal scrapers on the oven door glass, as they can cause scratches. To make cleaning the inside easier, you can try steam cleaning: place a bowl with half a lemon and water inside, and heat on high power for 10 minutes, which will loosen any debris. After steaming, wipe the interior with a soft, dry cloth. Always remember to use only microwave-safe utensils. To test a utensil, fill a microwave-safe container with water and the utensil, then heat for one minute. If the utensil becomes warm, it's not microwave-safe. Regular cleaning will keep your AiM microwave running efficiently.
101
Share

How can I fold and unfold my IGNITE ESC01 Kid Electric Scooter?

Folding and unfolding your IGNITE ESC01 Kid Electric Scooter is straightforward. Here's a guide to help you do it safely: Folding Procedure: Lift the folding handle and the front fork tube until you hear a "click." Firmly press the folding lock (adjust if needed). Securely lock the handle block using a screwdriver. Press the adjustment marble and adjust the telescopic rods to the correct position. Securely lock the buckle. Follow the assembly steps shown in the provided figure. Loosen the buckle. Press the adjustment marble to lower the rods fully. Loosen the folding buckle. Unfolding Procedure: Before unfolding, ensure all bolts highlighted in your user manual are tight and secure. Reverse the folding steps. Release the buckle, adjust the telescopic rods, unlock the handle block, and press the folding lock. Always consult the safety instructions in the IGNITE ESC01 Kid Electric Scooter manual. Properly folding and securing the scooter is crucial for safe transportation and storage.
108
Share

How can I connect my device to the SYNCWIRE SW-XC653 Bluetooth Transmitter?

To successfully pair your device with the SYNCWIRE SW-XC653 Bluetooth Transmitter, follow these steps: First, ensure the transmitter is in pairing mode. The LED display on the SW-XC653 should show "bt," indicating it's ready to connect. Next, activate Bluetooth on your device, such as your smartphone or tablet. Go into your device's Bluetooth settings and search for available devices. From the list, choose "SW-XC653" to begin pairing. If asked, enter the pairing code, which is either '0000' or '1234'. Once connected, the LED on the transmitter will display a solid connection. If you run into problems, try these troubleshooting tips: Make sure your device is within the Bluetooth range of the SW-XC653, typically up to 10 meters. Confirm that your device has Bluetooth functionality. If issues continue, reset the transmitter by holding down the multifunction button for 10 seconds until the LED flashes rapidly, and then try pairing again. For more detailed help, consult the SYNCWIRE SW-XC653 Bluetooth Transmitter User Manual or contact SYNCWIRE customer support.
112
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.