The top cabinet template included with the MONOGRAM UVM9125STSS microwave is crucial for a smooth installation. Here's a straightforward guide to using it effectively:
-
Prepare the Cabinet: Assess your cabinet's bottom. If it's flat, simply tape the template in place. If recessed, trim the template to fit within the recess, ensuring it lies flat.
-
Drill the Mounting Holes: Drill two 3/8-inch diameter holes at the "A" and "B" marked locations on the template. Always wear safety goggles while drilling.
-
Cut the Power Cord Hole: At point "D" on the template, cut a 2-inch diameter hole for the power cord. If your cabinet is metal, use the nylon grommet provided in the installation instructions to protect the cord.
-
Vertical Exhaust (If Needed): For vertical exhaust, cut out the shaded area "E" on the template, allowing for the exhaust.
-
Filler Blocks for Recessed Cabinets: If your cabinet has a recessed bottom, create two filler blocks from scrap wood, matching the dimensions of shaded areas "F" and "G" on the template. These blocks should be the same thickness as the recess depth. Drill 3/8-inch diameter holes in these blocks, aligning with points "A" and "B". Position the blocks so their holes match up with the cabinet's corresponding holes, ensuring they are level with the wall cabinet frame's bottom edge.
-
Final Steps: After following the template guide, remove the template and continue the installation process, referring to the full installation instructions included with your MONOGRAM UVM9125STSS microwave for detailed steps.
