Using the Laserliner SensoLite G 210 3D Laser Receiver for levelling with a rotary laser is straightforward. Here is a step-by-step guide:
- Power Up: Begin by inserting 4 x 1.5V LR03 (AAA) batteries into the battery compartment, ensuring correct polarity as indicated by the symbols.
- Turn On: Activate the laser receiver by pressing the ON/OFF switch.
- Activate Hand Receiver Mode on Laser: Set your rotary laser to the hand receiver mode. This setting causes the laser lines to pulsate rapidly, making them appear darker and easier to detect by the receiver.
- Find the Level: Position the receiver field of the SensoLite G 210 3D up or down until the middle LED illuminates. This indicates that you've aligned the receiver with the laser's level.
- Mark Your Level: Once the middle LED lights up, mark your reference point for levelling.
- Avoid Interference: Ensure that the laser lines are not reflecting off any surfaces, as this can cause inaccurate readings.
- Consider Light Conditions: Be aware that the laser line's intensity is strongest in the center and weaker towards the ends, which could affect the reception range. Also, direct sunlight may diminish the reception range; working in shaded areas is preferable.
- Using with a Staff: You can attach the laser receiver to a measuring staff using a universal mount. The Flexi measuring staff is especially suitable for measuring floor heights.
- Safety First: Be mindful of powerful magnetic fields that the device emits. Keep a safe distance if you have medical implants or sensitive electronic devices nearby.
- Maintenance: Clean the components of the SensoLite G 210 3D with a damp cloth. Avoid using cleaning agents, and remove the batteries when storing the device for a longer period.
