Keeping your Atlona AT-OME-EX-TX-WP Wallplate Transmitter's firmware up-to-date is crucial for optimal performance. Here's a simplified guide to updating the firmware, mirroring the steps in the official Atlona installation guide:
What You'll Need:
- Your Atlona AT-OME-EX-TX-WP Wallplate Transmitter
- The latest firmware file for your device
- A computer running Windows
- A USB-A to USB-B cable
Step-by-Step Firmware Update:
- Begin by disconnecting the power supply from the Atlona unit.
- Carefully remove the faceplate to access the hidden "firmware update" button. This button is located above the PWR LED indicator. For detailed instructions on faceplate removal, consult the "Faceplate Removal and Assembly" section in your device's manual.
- Connect the USB-A to USB-B cable between your computer and the HOST port on the Atlona unit.
- While reconnecting the power, simultaneously press and hold the firmware update button. The PWR LED indicator should start blinking green.
- A USB UPDATE folder should appear on your computer. If it doesn't automatically display, locate and select the USB UPDATE drive within Windows Explorer.
- Delete any files that are currently present in the USB UPDATE drive.
- Drag and drop the new firmware file into the USB UPDATE drive.
- The PWR LED indicator on the front panel will flash green during the update process. It's important to leave the USB cable connected throughout this process. Once the PWR LED stops flashing and turns solid green, the firmware update is complete.
Note: The entire update process may take up to five minutes. Make sure to follow the steps meticulously, and avoid interrupting the process to prevent any potential problems. For additional assistance, or if you need more detailed instructions, please refer to the official Atlona AT-OME-EX-TX-WP installation guide, or contact Atlona support.
