How do I sync the remote with my Arte Confort Celia Ceiling Fan?

[SanCharlotte]

To sync your remote with your Arte Confort Celia Ceiling Fan, follow these steps: First, ensure the fan has no power. You can do this by turning off the wall switch that controls the fan or by disconnecting the quick connect cables from the fan if there is no switch. Next, resynchronize the remote control. Here's how, depending on your setup:

• Syncing One Remote to One Fan:

  1. Cut off the power to the fan and wait 30 seconds.
  2. Restore power to the fan.
  3. Within 10 seconds, press and hold the synchronization button on your remote control for 3 seconds until you hear a signal. The remote control should work within a range of 8-10 meters.

• Syncing One Remote to Multiple Fans:

  1. Cut off the power to all fans and wait 30 seconds.
  2. Restore power to all fans.
  3. Within 10 seconds, press and hold the "ON/OFF light" button on each remote control for 3 seconds until you hear a signal. If the fans are within 10 meters of each other, they should sync simultaneously.

• Syncing Remotes to Individual Fans (e.g., Two Fans):

  1. Cut off power to Fan A and wait 30 seconds.
  2. Cut off power to Fan B and wait 30 seconds.
  3. Restore power to Fan B. Within 10 seconds, press and hold the "ON/OFF light" button on Remote B for 3 seconds until you hear the signal to sync Remote B with Fan B.
  4. Cut off power to Fan B and wait 30 seconds.
  5. Restore power to Fan A. Within 10 seconds, press and hold the "ON/OFF light" button on Remote A for 3 seconds until you hear the signal to sync Remote A with Fan A.
  6. Repeat these steps for each fan and remote control combination.

After following these instructions, your remote control should be successfully synchronized with your Arte Confort Celia Ceiling Fan. If you have any further questions or run into any problems, please consult your dealer or contact Arte Confort directly.