How do I sync my remote with the NEUS L Novelties Wall Solar fan?

[IslaRose]

If your NEUS L Novelties Wall Solar fan remote isn't working or you've got a new one, here's how to sync it. Remember to always cut off the power to the fan before you begin.

To sync a remote to a fan:

1. Power Down: Turn off the power to the fan completely and wait 30 seconds.
2. Power Up: Restore power to the fan.
3. Sync: Within 10 seconds of restoring power, press and hold the "ON/OFF light" button on the remote for 3 seconds until you hear a signal. The remote should work within 8-10 meters.

To sync one remote to multiple fans, repeat the steps above for each fan, ensuring they are all powered down and back up within the 10-second window. If the fans are close together (within 10 meters), they will sync simultaneously.

For individual fan synchronization when you have multiple fans, follow these steps:

1. Fan B Prep: Power off Fan B (the fan to be synchronized) for 30 seconds.
2. Fan A Prep: Power off Fan A (the fan to be removed from synchronization) for 30 seconds.
3. Sync Fan B: Restore power to Fan B, then, within 10 seconds, press and hold the "ON/OFF light" button on the remote for 3 seconds until you hear the signal to sync the remote with Fan B.
4. Fan B Power Down: Power off Fan B again for 30 seconds.
5. Sync Fan A: Restore power to Fan A, and within 10 seconds, press and hold the "ON/OFF light" button on the remote for 3 seconds until the signal confirms synchronization of the remote with Fan A.
6. Repeat: Repeat for each fan if you have more than two, customizing each remote's settings.

If you have any further questions, check the NEUS L Novelties Wall Solar fan instruction manual, or contact the manufacturer.