To synchronize your arteconfort LOLA Ceiling Fan remote control, follow these steps: To begin, make sure the power to the fan is switched off and wait until the fan blades have completely stopped. 1. Power Off: Turn off the power to your arteconfort LOLA Ceiling Fan and wait for about 30 seconds. 2. Power On: Restore the power to the fan. 3. Sync Remote: Within 10 seconds of restoring power, press and hold the synchronization button on your remote control for approximately 3 seconds until you hear a signal. The optimal operating range for the remote is typically between 8 and 10 meters. For synchronizing multiple fans at once: 1. Power Off All Fans: Turn off the power to all your arteconfort LOLA Ceiling Fans and wait for 30 seconds. 2. Power On All Fans: Turn the power back on to all fans. 3. Sync All Remotes: Within 10 seconds, press and hold the "ON/OFF light" synchronization button on each remote for 3 seconds until you hear a signal. If the fans are within 10 meters of each other, they should synchronize simultaneously. If you need to pair a specific remote to a particular fan: 1. Power Off Fan A: Turn off the power to Fan A (the fan you wish to desynchronize). Wait 30 seconds. 2. Power Off Fan B: Turn off the power to Fan B (the fan you want to sync). Wait 30 seconds. 3. Power On Fan B & Sync: Restore power to Fan B. Within 10 seconds, press and hold the "ON/OFF light" synchronization button on the remote for 3 seconds until you hear the signal, pairing remote B with Fan B. 4. Power Off Fan B: Turn off power to Fan B again and wait 30 seconds. 5. Power On Fan A & Sync: When power is restored to Fan A, within 10 seconds, press and hold the "ON/OFF light" synchronization button on the remote for 3 seconds to pair remote A with Fan A. 6. Repeat: Repeat this process for each fan you want to individualize with its remote. Always consult the official arteconfort LOLA Ceiling Fan instruction manual for more detailed guidance.
