How do I swap a faulty LED on my GE Holiday 24LEDI-7MMb-900 light string?

[DiBethany]

To replace a non-functioning LED in your GE Holiday 24LEDI-7MMb-900 LED light set, follow these steps: First, unplug the light string from the power source by grasping the plug itself, not the cord. Next, carefully pull the LED lamp and its plastic base straight out of the lamp holder. Replace the burned-out LED with a replacement 3.3 Volt, 0.066 Watt, LED type lamp, which should have been provided with the original product. If the new lamp's base doesn't fit, remove the base from the old lamp by straightening its leads and gently pulling the lamp out. Then, thread the leads of the new lamp through the holes in the old base, ensuring one lead goes into each hole. Once the lamp is fully inserted, bend each lead upwards, similar to the other LEDs in the set, so they can make contact with the connectors inside the lamp holder. Important: Only use the specified 3.3 volt, 0.066-watt replacement lamps that came with your GE Holiday lights to avoid fire hazards. This product does not have lamp shunts, so using different lamps could cause problems. If you need further assistance, consult the user manual or contact customer support.