To connect your PETLIBRO Automatic Cat Feeder to Wi-Fi, follow these steps for a smooth setup: First, ensure your mobile device's Bluetooth is enabled. For optimal performance, perform the setup indoors, away from direct sunlight. The feeder is compatible with 2.4GHz Wi-Fi networks only; if your network is set to 5GHz, configure it to also support 2.4GHz. Your Wi-Fi password should be limited to 12 alphanumeric characters; special symbols are not supported. Keep the feeder close to your router, ideally within 6 meters and without obstructions. If the connection fails, reset the feeder by pressing and holding the Reset button for 6 seconds, then wait two minutes before retrying. To connect via the app, open the app and go to the Home page. Tap "Add Device" or the "+" icon. Select "PLAF101 Wi-Fi Feeder". Follow the on-screen instructions, confirming the Wi-Fi indicator on the feeder is flashing. Choose "Bluetooth" in the top right corner of the screen and enable Bluetooth on your phone. Verify the indicator on the feeder flashes once every 0.5 seconds. Tap "Next." If the indicator doesn't flash, use the "Reset Device Step by Step" option. Add the "PLAF101" device, entering your Wi-Fi details, remembering to connect to a 2.4GHz network. Once connected, you can manage your PETLIBRO Automatic Cat Feeder via the app, setting feeding schedules and portion sizes for your cat.
